تست چسبندگی رنگ(کراس کات) برند TQC

تست چسبندگی (کراس کات)

کاربرد: جهت اندازه گیری چسبندگی پوشش های رنگ  و رزین

مدل: تیغه یک طرفه و یا 4 طرفه با فواصل تیغه های 1 و2 ویا 3 میلیمتر

ساخت : TQCهلند و  NEURTEKاسپانیا

کاتالوگ محصول

Cross-Cut-Adhesion-Test KIT-CC1000-PDF

The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Application Adhesion Tester appropriated to measure the adhesion of coatings or paints. Designed and made by NEURTEK. The cross cut test uses a blade to cut through the coating to the substrate. At least two cuts are made that intersect at 90 degrees to get a right angle lattice pattern. The cross-cut area is observed for any adhesion failure. After applying a normalized adhesive tape the resistance to separation can be observed on the tape by using a loupe.