مشاهده سبد تسویه حساب
ضخامت سنج التراسونیک برند GE مدل DM5E
خانواده DM5E جدیدترین نسل ضخامت سنج های قابل حمل نظارت بر خوردگی از GE Sensing & Inspection Technologies هستند. بهبود قابل توجهی در عملکرد نسبت به ضخامت سنج های خوردگی قبلی از نظر پایداری بهتر اندازه گیری ضخامت و تکرارپذیری در دماهای معمولی و بالا ارائه می دهد. برای عملیات در سخت ترین شرایط طراحی شده است محیط های کاری، انجام اندازه گیری ضخامت دیوار در خطوط لوله، مخازن تحت فشار و مخازن ذخیره سازی در صنعت نفت و گاز و همچنین بخش های پتروشیمی و تولید برق.
اصول کارکرد:اولتراسونیک، روش اندازه گیری اکو پالس
رنج اندازه گیری:بسته به پروب و مواد، 0.60 میلیمتر تا 508 میلیمتر (0.025 اینچ تا 20.00 اینچ) در حالت اندازهگیری IP تا 1 BW، 2.00 میلیمتر تا 127.0 میلیمتر (0.079 اینچ تا 5.00 اینچ) در حالت Dual-Multi Measurement Rangeness، the 0.3 میلی متر تا 2.50 میلی متر (0 تا 0.098 اینچ) باشد.
رزولشن:0.01 میلی متر پیش فرض - قابل انتخاب 0.01، 0.1 میلی متر (0.001 اینچ پیش فرض - قابل انتخاب 0.001، 0.01 اینچ)
محدوده سرعت مواد:
0.508-18.699mm/msec
The DM5E family is the latest generation of portable corrosion monitoring thickness gauges form GE Sensing & Inspection Technologies. It offers significant improvement in performance over previous corrosion thickness gauges in terms of better thickness measurement stability and repeatability at normal and elevated temperatures. It has been designed for operation in the harshest of working environments, performing wall thickness measurements on pipelines,pressure vessels and storage tanks in the oil and gas industry, as well as the petrochemical and power generation sectors.
Operating Principle
Ultrasonic, Pulse Echo Measurement Method
Measuring Range
Depends on Probe and Material, 0.60 mm to 508 mm (0.025” to 20.00”) in IP to 1st BW Measurement Mode, 2.00 mm to 127.0 mm(0.079” to 5.00”) in Dual-Multi Measurement Mode, the Coating Thickness Range Shall be 0.3 mm to 2.50 mm (0” to 0.098”).
Measuring Resolution
0.01 mm Default - Selectable 0.01, 0.1 mm (0.001” Default - Selectable 0.001, 0.01”)
Material Velocity Range
0.508 to 18.699 mm/msec (0.0200 to 0.7362”/msec)
Material Velocity Resolution
1 m/s (0.0001”/msec)
Units
Inch or Millimeter
Calibration
One-Point Cal, On-Block and Off-Block, Two-Point Cal
Pulser
Excitation Pulse
Spike Pulser
Voltage
120 V into 50 ohm Load, Using 20 MHz Oscilloscope
Receiver
Bandwidth
500KHz to 12 MHz @ -3 dB
Gain
Automatic Gain Control
Display Type
High-Resolution Graphical LCD, 64 x 128 Pixels, 53.0 mm x 27.0 mm with Backlight and Adjustable Contrast
Update Rate
4 Hz or 8 Hz, User Selectable, 24 Hz Scan Mode Capture Rate
Thickness Value Display
NORMAL View Mode
5 Digit, 10.6 mm (0.4”) High
B-SCAN View Mode
5 Digit, 2.55 mm (0.1”) High
Display of Last Reading
Solid Filled or Hollow Digits Indicate Coupled or Uncoupled Condition
Setups
9 Standard Setups for Probes
Alarm Settings
Minimum and Maximum Alarms, Range of 0.25 mm to 508 mm, 0. (0.010” to 20.00”) Reading Alternates Between Solid and Hollow When Alarms Are Enabled and Violated
Power Requirements
2 “AA” Size Batteries
Battery Life/Operating Time
Approximately 60 Hours
Instrument Shut-0ff
Selectable ALWAYS ON or AUTO OFF After 5, 10, 15, 30 Minutes of Inactivity
Language
Selectable English, German, French, Spanish, Italian, Russian, Japanese and Chinese
I/O Connectors
Transducer
Dual Lemo 00 (coax)
Mini-USB
Mini-USB to PC
Temperature
Operating
10°C to +50°C (+10°F to +120°F)-
Storage
20°C to +60°C (-10°F to +140°F)-
Weight
223 g (0.597 lb) Including Batteries
Size
138 mm x 32 mm x 75 mm
Shock
IEC 68-2-27 Ea, as per Mil Std 810C Method 516.2 Procedure I with a 15g 11ms Impulse Half Sinusoidal Wave Applied 6 Times per Axis
Sealing
IEC529 / IP54, Dust Proof/Dripping Water Proof as per IEC 529 Specifications for IP54 Classification
ارائه راهکارها و شرایط سخت تایپ به پایان رسد وزمان مورد نیاز شامل حروفچینی دستاوردهای اصلی و جوابگوی سوالات پیوسته اهل دنیای موجود طراحی اساسا مورد استفاده قرار گیرد.