مشاهده سبد تسویه حساب
دستگاه تست زبری سطح Elcometer 7061 یک راه حل اندازه گیری قابل حمل و سبک برای محدوده اندازه گیری زبری سطح است که برای رعایت استانداردهای بین المللی مورد نیاز است.
اندازه گیری زبری سطح بر حسب Ra ، Rz یا Tp بیان می شود. این مقادیر شامل اندازه گیری مشخصات قله به دره در ترکیب با ارزیابی فراوانی قله ها در منطقه نمونه است.
دستگاه تست زبری سطح Elcometer 7061 برای ارزیابی شرایط زبری سطح در طیف وسیعی از کاربردهای عمومی صنعتی مناسب است. به ویژه در مواردی که نمونه برای آزمایشگاه زیاد است.
اندازه گيري پارامتر هاي Vo, A2, A1, Mr2, Mr1, Rvk, Rk, Rpk ,Rpm, Rp, Rmax, Ry, Rz, Rq, Ra, Rx, RAr, RSm, Tp, Rmr, RPc, R3z, Rt خروجي RS232 و USB ذخيره ۱۵ فايل و ۲۰۰۰۰ داده قابليت اتصال پراب هاي مختلف مناسب با سطوح Curve و غير قابل دسترس و حفره ها
The Elcometer 7061 surface roughness tester is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.
In protective coating applications there is a requirement to measure surface roughness.
Measurements of surface roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area.
The Elcometer 7061 surface roughness tester is suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory.
Multi-Lingual Display: All the required information is displayed on screen in a choice of 14 languages.
Flexible: Can be used in virtually any position; horizontally, vertically, upside down. A height adjustment accessory to accommodate various sample sizes is supplied with each gauge as standard.
Integrated Calibration Standard: No external calibration standard is required; provides greater ease of use.
Drive Unit: Can be rotated and moved longitudinally; enables the stylus pick-up to be moved to the calibrating position. The stylus pick-up is also protected for transport in this position.
Stylus pick-up with removable protection: 2µm (80µin) diamond stylus tip with a measuring force of 0.7 mN. Different stylus’ are available for various applications.
How to use a surface roughness tester
Surface roughness testers consist of a stylus which is mechanically drawn across the surface recording an 'image' of the surface roughness across a pre-defined sample length. The measurement technique provides a number of measurement parameters including:
Rmax: The greatest distance between the highest peak and lowest valley over the sampling length.
Ra: The average surface roughness over the sampling length.
Rt: The distance between the highest peak and the lowest valley within any given sampling length.
Rz: The average distance between the highest peak and the lowest valley over a number of sampling lengths.
ارائه راهکارها و شرایط سخت تایپ به پایان رسد وزمان مورد نیاز شامل حروفچینی دستاوردهای اصلی و جوابگوی سوالات پیوسته اهل دنیای موجود طراحی اساسا مورد استفاده قرار گیرد.