مشاهده سبد تسویه حساب
آنالایزر مونوکسیدکربن یونیتی UNI-T UT-337A
خاموش شدن خودکار
Data hold
آلارم بصری و صوتی High/low
قابلیت انتخاب ℃/℉
عملکرد کالیبراسیون و تنظیم نقطه صفر جهت جبران سازی دمایی
تمرکز روی نمایش co فعلی و مقادیر max
رنج اندازه گیری کربن بین
0-1000ppm
دقت اندازه گیری کربن %5+
وضوح 1ppm
زمان پاسخ گویی کمتر از 60 ثانیه
دارای سنسور از نوع الکتروشیمیکال
روش نمونه برداری : انتشار
سنسور کالیبراسیون داخلی
نور پس زمینه نمایشگر
SPECIFICATIONS-
CO Measure Range 0~1000ppm-
Accuracy ±5% or 5ppm-
Resolution 1ppm-
Response Time <60s (90% of reading)-
Sensor Type - electrochemical gas sensor-
Sampling Method - diffusion-
FEATURES-
Max Hold-
Alert Value Setup-
Audible Alert-
Virtual Alert-
Temperature Display-
Sensor Self-Test-
User Calibration-
Display Backlight-
Low Battery Indication-
Auto Power Off-
دی اکسیدکربن سنج یونیتی UNI-T UT-A37
CO2 متر دیجیتال یونیتی مدل UNI-T UT-A37 جهت تشخیص مقدار CO2 در محیط های مختلف کاربرد دارد و میزان غلظت CO2 را اندازه گیری می کند. بعلاوه قابلیت نمایش دما، رطوبت، تاریخ و زمان را نیز دارد.گازهای گلخانهای که کربن دیاکسید نیز یکی از آنهاست باعث میشود که اشعههای خورشید با طول موج پایین و از ابرها که آنها نیز جز گازهای گلخانهای هستند بگذرند و بعد از برخورد به سطح زمین بازتاب شده و طول موج آن افزایش مییابد و از پرتوهای فرابنفش به فروسرخ تبدیل میگردد. پرتوهای فروسرخ خطرناک نیستند و بعد از برخورد به گازهای گلخانهای بازمیگردند و نمیتوانند از آنجا عبور کنند و باعث گرم شدن می شوند.
A37 is used to detect CO2 concentration in different environments. The LCD displays CO2 concentration, temperature, humidity, and date/time together. Air quality is indicated with emoticons. When CO2 concentration gets too high, audio and visual alarm will go off.
Automatic baseline correction-
Audible and visual alarm-
Low battery indication-
Auto power off-
Backlight-
سایز ذرات:2.5,10um
سطح تراکم حجمی کانال طبق استاندارد:PM2.5:0~2000ug/m3 ;PM10:0~2000ug/m
رنج اندازه گیری دما:0~50درجه سانتی گراد
دقت اندازه گیری دما: 1℃/2℉±
رنج اندازه گیری رطوبت:%RH0~100
دقت اندازه گیری رطوبت:±5%RH @0 to 20%RH and 80 to 100%RH ±3.5%RH @20 to 80%RH
HCHO:0.00~5.00mg/m³
HCHO Accuracy:±5%F.S
TVOC:0.00 to 5.00mg/m3
TVOC Accuracy:±5%F.S
Desktop Air Particle Counter
The CEM 968 is an easy to use, cost effective, desktop PM 2.5 / PM 10 Air quality meter. With its large, bright colour LCD display it is able to display all parameters of air quality in an easy to read intuitive display. The single button operation does away with cumbersome menus, and displays all the relevant information on one screen, while still having multiple display choices like graphs, simultaneous PM 2.5 and PM 10 readout and more.
The DT-968 also displays the Ambient temperature as well as the humidity. This gives the user a comprehensive insight into the quality of the surrounding air.
feature-
2.4’’ TFT 320 x 240 pixels Color LCD display-
Determination of suspended particle concentration in the air by weight method (PM2.5/PM10)-
PM2.5/PM10-
Air temperature and humidity-
Analog bar indicator-
Rechargeable Battery-
CO-110 برای اندازه گیری مقدار مونواکسید کربن ( CO یا گاز کربن مونوکسید) هوا بکار می رود. CO متر CO-110 ساخت شرکت کیمو از کشور فرانسه می باشد. این نمایشگر قابلیت اندازه گیری مونو اکسید کربن و دما از طریق سنسور مجزا را دارد.
kimo CO-110 CO & Temperature Meter was being designed and manufactured by Kimo, a well experienced manufacturer for Environmental Measuring Instrument.
Features:
easures and displays the amount of carbon monoxide (CO) content in ambient air*
CO measurement range from 0 to 500ppm*
Also measures ambient temperature from -20 to +80°C*
Flexible CO sensor probe *
Set two configurable alarm thresholds*
Backlit LCD screen*
Switch between Celsius and Fahrenheit temperature measurement modes*
Display MAX/MIN values taken over a period of time*
Adjustable and resettable automatic shutoff*
با استفاده از دستگاه نشت یاب گاز WINTACT تنها با یک دست، می توان نشتی انواع گاز را تشخیص داد . این دستگاه با استفاده از سنسور فلکسیبل 30 سانتیمتری، نشتی را تشخیص داده و در صورت بروز نشت گاز ،هشدار می دهد. از این دستگاه به طور گسترده در زمینه نظارت بر محیط زیست ، صنعت پتروشیمی ، تصفیه فاضلاب ، تحقیقات کشاورزی ، پزشکی و سایر زمینه های تشخیص استفاده می شود.
Specifications Material: ABS- Sensitivity: 50ppm methane- Sensor Type: Low power semiconductor- Warm-up Time: 60 seconds (25℃, 60%RH environment)- Response Time: 2 seconds- Operation Cycle: Continual operation- Alarm Limit: Lel 10% of methane- Low Battery Indication: 3±0.2V- Operating Environment: 0~50℃(32~120℉), 10~90%RH(non-condensing)- Working Current: About 150mA- Power Supply: 3 * 1.5V AAA battery (NOT included)- Flexible Tube Length: 318mm / 12.52in- Item Size: 132 * 68 * 27mm / 5.20 * 2.68 * 1.06in- Item Weight: 166g / 5.88oz- Package Weight: 224g / 7.93oz- Package Size: 24 * 15 * 5cm / 9.45 * 5.91 * 1.97in-
تشخیص تمام گاز های سردکننده HCFC ( هیدروکلروفلروکربن ) ، HFC ( هیدرو فلرو کربن ) . تشخیص ترکیب 5% هیدروژن و -95% نیتروژن . حسگر دیود گرما دیده . سه مدل حساسیت کم ، معمولی و زیاد . صفر خودکار اتوماتیک و دستی .
مشخصات فنی :
گاز های قابل تشخیص دستگاه نشت یاب گاز به شرح مقابل می باشند : دسته ی HFC و HCFC و CFCدستگاه نشت یاب گاز دارای حسگر نیمه هادی می باشد ، و نمایشگری LCD 13 دارد . 8 عدد برای نمایش آستانه ها .3 عدد برای حساسیت تشخیص و 2 عدد برای مقدار باتری و صفر خودکار دستی . نشانگر های دستگاه نشت یاب گاز به دو دسته ی LED که با بالا رفتن چگالی گاز ، تعداد آنها نیز تا 8 تا افزایش یافته و صوتی که بوق مانند است و با افزایش چگالی گاز ، افزایش دارد . طول پراب دستگاه 30 سانتی متر بوده و قابل انعطاف می باشد .این نشت یاب گاز تا 12 ساعت قابلیت کار خودکار داشته و دارای جنس ABS بوده و حفاظت آن از مدل IP54 میبباشد . دمای کار نشت یاب گاز فوق از صفر تا 50 درجه بوده و قابلیت استفاده از آن در محیط هایی که در ارتفاع صفر تا 200 متر قرار دارند به شرط نامتغیر بودن غلظت هوا نیز وجود دارد . دمای نگهداری از دستگاه بین منفی 20 و 80 درجه سانتی گراد می باشد و خاموشی خودکار پس از 15 دقیقه تنظیم شده است . این دستگاه وزنی معادل 295 گرم دارد .
نشت یاب گاز فوق دارای سه حالت اندازه گیری به ترتیب زیر میباشد :
حساسیت پایین ( B ) . حساسیت عادی ( norm ) . حساسیت بالا ( H )
بازه ی اندازه گیری نشت یاب گاز DF110 در سه حالت بالا از صفر تا 300g/an ، صفر تا 30g/an و3 g/an می باشد . اخطار بصری بر روی نمایشگر در سه حالت نیز این گونه است که وقتی چگالی گاز به حداکثر قابل انداز ه گیری برسد تمام LED ها روشن می شوند .
Kimo DF 110 Detector of refrigerant gases and hydrogen
Features
3 modes of sensibility-
IP54 ABS housing-
Detection of all the HCFC et HFC refrigerants-
Detection of mixtures 5% hydrogen - 95% nitrogen-
with verification certificate-
Flexible probe-
automatic auto-zero-
کاتالوگ نشت یاب گاز برندKIMO مدل df110 راازفایل زیر دانلود نمائید.
Detector-KIMO DF110-PDF
نشت یاب گاز شهری مدل KIMO FG110 قابلیت نمایش نشت گاز متان، LPG و دیگر هیدروکربن ها را دارا می باشد. همچنین ساخت کمپانی KIMO فرانسه است. از جمله ویژگی های دتکتور گاز شهری استفاده ی آسان . عملگر hold برای حداقل و حداکثر مقدار. نشان گر نشت گاز در واحدهای ppm ، %vol ، %LEL . نور پس زمینه قابل تنظیم . تشخیص گازهایی همچون متان ، پروپان و ایزوبوتان . اخظار برای مقادیر بین 1000 تا 10000 ppm .
دارای حسگر نیمه هادی است و صفحه نمایشگر آن از LCD چهر خط با اعاد 36×50 میلی متر ساخته شده است . بر 5 کلید نیز بر روی دستگاه دارد . پراب دستگاه قابلیت انعطاف دارد و طول آن به 30سانتی متر میرسد . دارای جنس ABS و حفاظت IP54 است و تغذیه دستگاه بوسیله 4 باتری نیم هقلمی 1.5 ولت است ، همچنین دستگاه بعد از 20 ساعت از حالت کار خودکار خارج میشود و دارای تنظیم خاموشی خودکار از صفر تا دو ساعت میباشد . دمای کارکرد دستگاه بین دمای صفر تا 50 درجه سانتی گراد است و محیط هایی در ارتفاع صفر تا 2000 متر نیز به شرط نا متغیر بودن شرایط غلظت هوا میباشد . دستگاه را در دمایی بین منفی 20 تا 80 درجه سانتی گراد نگهداری کنید . وزن دستگاه 295 گرم اندازه گیری شده است .
The KIMO FG110 is a portable gas detector suitable for detecting methane (CH4), LPG (isopropanol and isobutane) and other combustible hydrocarbon gas types.
Equipped with a flexible gooseneck probe which will bend easily into different shapes, the FG110 is ideal for checking inside objects or in difficult-to-reach areas. It'll both alert you to the presence of gas and measure the content in ppm, %vol or %LEL; if the FG110 detects gas levels from 1000 to 10,000 ppm, it'll sound the alarm.
The alarm is audible - when gas is detected, the FG110 will start to sound a beeping tone. This tone will increase in frequency as the concentration increases; as the threshold of 1000ppm is reached, the tone will be continuous and you should ake appropriate action to protect yourself.
This gas detector also includes a hold function, MAX/MIN mode and has a backlit LCD screen.
دتکتور فرمالدهید GM-8801 ساخت شرکت بنتک از کشور چین است. دستگاه سنجش فرمالدهید دیجیتال GM 8801 جهت تست وجود HCHO در محدوده 0 تا 3mg/m3 کاربرذ دارد. آنالایزر گاز BENETECH GM8801 دستگاهی با قابلیت حساسیت بالا و با صفحه نمایش LCD برای تست گاز فرمالدهید محیط است.
مشخصات فنی فرمالدهید سنج مدل GM8801:
محدوده اندازه گیری فرمالدهید: 0تا3mg
رزولوشن : 0.01mg/m3
نوع سنسور : سنسور الکترومکانیکی HCHO
ماکزیمم / مینیمم / نگهداری داده
زمان پاسخ : کمتر از 30 ثانیه
صفحه نمایش LCD با نور پس زمینه
آلارم هشدار کمبود باتری
Benetech GM8801 High Sensitive Formaldehyde Detector Meter HCHO Air Quality Testing Gas Analyzer Tester
Specification
Model: GM8801-
Color: show as pictures-
Size: 91.5*64.8*135mm-
Material: plastic-
Gas tested: HCHO in the air-
Measuring range: 0~3mg/m3-
Minimum Reading: 0.01mg/m3-
Resolution: 0.01mg/m3-
Basic Error: ±0.03mg/m3or±5%-
Response time: <30 Seconds-
Sensor type: Electrochemical HCHO Sensor-
Operating environment: 0~50°,32~122°;10%~90%RH-
Storage environment: —10~80°,-14~176°;10~75%RH-
LCD backlight display-
Power supply: 3x3.6 NiMH batteries(battery not included) or 4.2v power adapter-
PARTICLE COUNTER PC200
Measuring instrument for precise control of air quality, for example in clean rooms or for testing filter systems
The PC200 is an ergonomic, hand-held measuring device with a built-in photo and video function, which allows the user to monitor air particles and gather environmental data.
With its ISO 21501-4 conformity, the PC200 can be used for various measuring functions from testing cleanrooms and filter efficiency to monitoring burdens at workspaces and quality assurance.
All measured values of the six particle size channels are shown simultaneously on the 2.8 inch colour LCD display.
An additional colour indicator display with automatic acoustic alarm makes it easier to quickly detect critical particle concentrations.
As well as the size and amount fractions of air particles, the PC200 also detects environmental factors such as air temperature, relative humidity, and dew and wet-bulb temperature.
The built in digital camera then makes it possible to take photos and record videos of the measured environment.
The PC200's data logging function can store up to 5,000 measurement records on its internal memory. This can be expanded by up to 8 GB with a MicroSD card, which significantly raises the memory capacity.
After measuring, all detected data can be quickly and easily transmitted to a PC via a USB interface for documentation or analysis.
گازسنج برند CEM مدل CEM CO-110
Carbon Monoxide Meter CO-110 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Digital LCD Display
Auto/manual zero
Memory for 10 complete data sets
Record mode
Red & Blue LED light and audible alarm
High Accuracy, quick response
Pocket size and easy to use
Fast sampling
Max Hold
Data Hold
Above 200 PPM, the beeper sounds continuously
غبارسنج برند تروتک مدل TROTEC BQ20
BQ20 یک دستگاه سنجش زیست محیطی سبک و با کاربری راحت است که پارامترهایی مانند درجه حرارت هوا، رطوبت و غلظت گرد و غبار در هوای اتاق را اندازه گیری میکند. با استفاده از دستگاه BQ20 میتوان برای نظارت سریع کیفیت هوا در محیطهای ایزوله مثل بیمارستان، اتاق عمل، آزمایشگاه، محیطهای صنعتی، داروخانهها، اتاقهای تمیز وکارخانهها استفاده کرد؛ علاوه بر این BQ20 به تشخیص سلامت محیط خانه، مدارس، مهدکودکها و هر محیط دیگری نیز کمک میکند. دستگاه غبارسنج BQ20 میزان PM10 و PM2.5 را در هر مترمکعب اتاق به صورت عددی و نمودار گرافیکی نمایش میدهد. PM10 ذرات جامد یا مایع موجود در هوا هستند که دارای قطری کمتر از 10 میکرون بوده که این ذرات به علت ابعاد ریز خود میتوانند از سیستم دفاعی مجاری تنفسی عبور کنند. ذرات PM2.5 یا همان ذرات معلق کوچکتر از 2.5 میکرون خطرناکتر هستند، چون میتوانند از لایههای دستگاه تنفسی عبور و به اعماق ریه نفوذ کنند. این ذرات وارد بافت ریه می شوند و اگر حامل آلاینده خاصی باشند آن را وارد خون میکنند که عوارض بسیار جدی به دنبال دارند. ذرات معلق بسیار ریز به قسمت های تحتانی سیستم تنفسی و داخل ریه نفوذ میکنند و سبب اثرات قلبی و ریوی متعددی میشوند. در حال حاضر، بسیاری از کشورها مقادیر محدودیت قانونی برای غلظت ذرات ریز (به عنوان مثال در محل کار) برای محافظت از سلامت انسان را تعیین کرده اند. به کمک غبارسنج تروتک مدل BQ20، میتوان به سرعت میزان غلظت ذرات ریز را اندازه گیری کرد. یکی دیگر از قابلیت های دستگاه BQ20 نمایش همزمان میزان غلظت گرد و غبار با سایز 2.5 و 10 میکرومتر است که با نسبت جرم میکروگرم در هر متر مربع هوا، نمایش داده میشود. همچنین این دستگاه دارای نمایشگر خطی شش رنگ به همراه هشدار صوتی است که تشخیص ذرات بحرانی را راحتتر میکند.
BQ20 PARTICLE MEASURING DEVICE
Compact environmental measuring device for the detection of the particulate matter pollution, air temperature and humidity
In the BQ20 you have a compact and easy-to-handle environmental measuring device permitting the detection of all health-relevant room climate parameters with just one device: air temperature, humidity and – above all – the dust concentration in the room air:
The BQ20 simultaneously captures quantitative concentrations of airborne inhalable dust (PM10) and alveolar dust (PM2.5) the particle masses of which are displayed directly as mass proportion in µg per m² of air. Moreover, a colour bar indicates the current particle burden.
Furthermore, you can define individual threshold values on the device. When exceeded, you are immediately alerted by way of an acoustic signal. This is a particularly valuable function when using the BQ20 for the continuous monitoring of interior spaces. For such permanent applications the power for the otherwise battery-operated, mobile BQ20 may be supplied directly via USB cable.
The combination of measurable environmental parameters that is unique for this device class commends the BQ20 as an indispensable aid for the quick monitoring of the air quality at the workplace, in public facilities or at home.
By now, many countries have stipulated statutory limit values for the fine particulate concentrations – for instance at the workplace – to protect human health.
Particulate matter is a complex combination of various particles and is divided into different fractions based on size. Dust that can be inhaled and advances right up into the nasal cavity is called inhalable dust. It defines all dust particles with an aerodynamic diameter of less than 10 µm as dust particle size PM10.
The dust particle size PM2.5 further comprises all ultrafine alveolar particles –also referred to as alveolar dust. These manage to get as far as the bronchia and pulmonary alveoli.
With the BQ20 these dust fractions can be registered as PM10 and PM2.5 according to the customary international PM standard; their percentage per cubic metre room air is indicated numerically on the colour display of the BQ20. The degree of air pollution is further indicated graphically via a bar graph. That way, using the BQ20, you can quickly and reliably draw quantitative conclusions about the prevailing fine particulate concentration.
غبارسنج پارتیکل کانتر CEM مدل HT9600 Air Quality Analyzer Humidity Meter Handheld Particle Counter
دستگاه غبار سنج پارتیکل کانتراز دستگاه دیجیتال پارتیکل کانتر یا همان غبارسنج برای اندازه گیری میزان ذرات معلق در هوا استفاده می شود. از محاسن این دستگاه دارا بودن پمپ داخلی بی صدا برای مکش هوای محیط و نمایش میزان ذرات معلق در هوا بر حسب کانال های مشخص شده می باشد .نمایشگر دستگاه کاملا رنگی و هوشمند بوده و زمان نمونه برداری با زمان استاندارد عینا برابری می کند .دستگاه در رنج های زیر اندازه گیری را انجام می دهد.
Test particle size: 0.3µm/2.5µm/10.0µm
Temperature range: 0~50 C/32~122 F
Accuracy: ±5%
Humidity range: 0~100%RH
Light source: Semiconductor lasers
Cem HT9600
Device Quality : A+++
آنالایزر گاز احتراق مدل Testo 340 آلمان
آنالایزر گاز احتراق مدل Testo 340 با قابلیت اندازه گیری گازهای O2,CO,(NO,NO2,SO2,option) و محاسبه Nox مورد استفاده قرار می گیرد.آنالایزر گاز احتراق مدل testo 340بهینه سازی احتراق، افزایش بهره وری و به حداقل رساندن استفاده از سوخت لازم را برای رقابت در بازار امروز می باشد.
مدل 340 ساخت کمپانی بزرگ آلمانی TESTO یک آنالیزور گاز های خروجی دودکش است که به شما در زمینه تصمیم گیری در داشتن یک سیستم احتراق خوب کمک شایانی می کند. TESTO 340 بااطلاعات دقیق وسنسور قبل کالیبره شما را به تصمیم گیری آگاهانه احتراق قادر می سازد. این ابزار ایده آل برای تایید مناسب تنظیم کردن یا شناسایی مشکلاتی انتشار است. آنالایزر تستوقابلیت اندازه گیری 4 گاز به طور همزمان را دارا می باشد.بدنه مقاوم ، قابل حمل بودن و دستگاهی جمع و جور آن را به یکی از پر کاربرد ترین دستگاه ها در زمینه اندازه گیری گاز های خروجی دودکش تبدیل کرده است.سنسور های قابل تعویض و از پیش کالیبره شده ، امکان اندازه گیری را هر چه سریع تر و با دقت تر کرده است.
مشخصات فنی دستگاه آنالایزر گاز احتراق مدل testo 340:
همچنین تمامی پراب ها و قطعات به کار رفته در آنالایزر گاز تستو 340 از بهترین کیفیت طراحی و ساخته شده اند.با استفاده از فناوری پیشرفته Plug and Play می توان با تغییر و یا اضافه کردن سنسور هایی در کمتر از یک ثانیه یک اندازه گیری گاز با دقت را انجام داد.مقادیر اندازه گیری شده گاز های مختلف را می توان ذخیره کرد و همچنین قابلیت اتصال به پرینتر و کامپیوتر توسط بلوتوث جهت آنالیز و بررسی بیشتر داده ها دارد.
Precise technology: That’s what you want to be able to rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer ticks all these boxes.
The testo 340 combustion analyzer. For industrial emission measurements and more
Which sensors do you need in the course of your daily work and which measurements do you normally need to carry out? The testo 340 comes standard-fitted with an O2 sensor and four more sensors (CO, COlow, NO, NOlow, NO2 or SO2) for you to choose from, allowing you to customize your analyzer to suit your individual demands. The analyzer’s compact design and the reliable technology tucked away inside ensure increased mobility, making it ideal for use in international service operations and for installing or carrying out checks on firing plants or energy production systems. To find out more about the different application possibilities and to see which industrial applications your testo 340 flue gas analyzer is suitable for just click on the “Applications” tab.
The flue gas analyzer has an extended measuring range which allows you to carry out measurements even when gas concentrations are very high (i.e. during industrial flue gas analysis). The extended measuring range (thinning) is activated automatically when high gas concentrations suddenly occur. The demands on the sensor are no different to than when the flue gas analyzer is used in low gas concentrations.
Delivery Scope
testo 340 flue gas analyzer, calibration certificate, shoulder strap, O2 sensor and integrated flow and pressure difference measurements.
PLEASE NOTE: Your testo 340 must be fitted with a second gas sensor for it to work. Up to three additional sensors can be fitted.
سیستم آنالایزر گاز های حاصل از احتراق testo 350 ابزاری ایده آل برای تجزیه و تحلیل گاز های ناشی از انواع دودکش صنعتی و گازهای گلخانه ای ، مشعل ها ، توربین های گازی و فرآیند های حرارتی می باشد. تستو 350 تمامی اندازه گیری ها و تجزیه و تحلیل های مورد نیاز صنایع و محیط زیستی را انجام می دهد. سیستم آنالایزر گاز دودکش testo 350 شامل دو واحد مجزا شامل Testo 350 Control Unit (به عنوان محصول جداگانه) دارای صفحه نمایش گرافیکی، جهت اندازه گیری میزان انتشار گاز و کارکرد آسان برای مشعل ، توربین گازی ، ژنراتور ها و سایر کاربرد های تعریف شده توسط کاربر می باشد. واحد کنترل testo 350 امکان کنترل از راه دور واحد تجزیه و تحلیل Analysis Box را برای اندازه گیری میزان انتشار در نیروگاه های بزرگ را، امکان پذیر می کند. واحد آنالایزر گاز testo 350 جهت انجام اندازه گیری میزان تولید گاز های گلخانه ای طراحی شده است این تجهیز شامل تمام فن آوری های سنسور و الکترونیک می باشد. این واحد به طور استاندارد دارای یک سنسور گاز O2 و یک سنسور اضافی برای راه اندازی از بین سنسورهای گاز CO ، CO2 ، NO ، NO2 ، SO2 ، H2S یا CxHy می باشد.
تستو 350 امکان اندازه گیری های بدون محدودیت را حتی در صورت وجود غلظت بالای گاز فراهم می کند. سیستم آنالایزر گاز testo 350 به منظور محافظت از سنسور ها ، هنگامی که غلظت زیاد گاز به طور غیرمنتظره به دستگاه اعمال می شود، تنظیمات اندازه گیری رقیق سازی را به طور خودکار فعال می کند. درب Analysis Box در قسمت زیرین دستگاه امکان دسترسی سریع به تمام قسمتهای قابل سرویس مانند پمپ ها و فیلترها را فراهم می کند این دریچه به کاربران امکان تمیز یا تعویض این قطعات را می دهد. علاوه بر این تستو 350 دارای چندین نرم افزار مختلف برای آنالایز گاز های دودکش به طور مداوم و نمایش انواع هشدار و گزارش می باشد واحد آنالایزر و تجزیه و تحلیل testo 350 Analysis Box را می توان به همراه واحد کنترل استفاده کرد و همچنین می توان این ترکیب را به صورت مستقیم با استفاده از رایانه شخصی / نوت بوک و نرم افزار easyEmission (از طریق USB ، Bluetooth® 2.0 یا CANCase) استفاده کرد. پس از برنامه ریزی ، واحد تجزیه و تحلیل Analysis Box می توان اندازه گیری ها را انجام داد و نتایج را به صورت مستقل ذخیره کرد. همچنین امکان نمایش یا انتقال داده های اندازه گیری از واحد تجزیه و تحلیل به واحد کنترل یا نرم افزار وجود دارد. جهت ارسال بلافاصله گزارش های اندازه گیری می توان از نرم افزار رایگان تستو استفاده کرد این نرم افزار بر روی تلفن هوشمند یا تبلت Android کاربر نصب می شود و تجزیه و تحلیل های انجام شده توسط دستگاه را به صورت آنلاین و آفلاین نمایش می دهد
کاربردها:
اندازه گیری گاز های احتراق در توربین های گازی توربین های گازی دارای مقادیر محدودی گاز دودکشی حاصل از احتراق هستند که باید در حین کار بررسی شوند و بسته به اندازه سیستم مرتباً پایش می شوند. در توربین های گازی پس از راه اندازی و کار، تعمیر و نگهداری مقادیر انتشار گاز سیستم از نظر رعایت اصول با مشخصات سازنده بررسی می شود و در صورت لزوم مستند می شود.
با توجه به غلظت کم NO در توربین های گازی، اندازه گیری میزان انتشار در هنگام کار بازرسی و تنظیم در توربین های گازی باید بسیار دقیق میباشد. آنالایزر پرتابل گاز دودکش و حاصل از احتراق testo 350 با ترکیب سنسور NO2 و سنسور ویژه NOlow با وضوح 0.1ppm برای برآورده سازی دقیق این نیازها زراحی شده است. بعلاوه این سیستم گاز سنج یکپارچه به همراه پروب ویژه گاز دودکش با شلنگ مخصوص محافظت در برابر جذب NO2 در بازار عرضه می شود همچنین اجازه می دهد مقادیر اندازه گیری شده ، را براساس تاریخ و زمان و شرایط محیطی مختلف ، مقایسه کنید. اندازه گیری گاز های حاصل از احتراق انواع موتور دیزلی و صنعتی آنالایزر گاز دودکش (اگزوز) testo 350 ابزاری مهم برای تنظیم موتور گازی یا دیزلی برای بهینه سازی کارکرد موتور می باشد. از تستو 350 در هنگام راه اندازی موتور دیزلی ، در فواصل منظم نگهداری یا برای عیب یابی فرایند های کاری استفاده می شود. اندازه گیری گاز اگزوز برای تنظیم موتور و بهینه سازی عملکرد آن مطابق با مقررات محیط زیستی لازم می باشد این فرآیند مستلزم اندازه گیری ها در طول چندین ساعت است. تجزیه و تحلیل گاز ها در فرآیند های حرارتی تجزیه و تحلیل گاز دودکش برای نظارت بر فرآیند حرارتی در سیستم های احتراقی مانند کوره های نقاله ای (مداوم ) برای شیشه ، سرامیک و مواد ساختمانی ، یا در کوره های ذوب و فولاد و ... استفاده می شود. تحلیل گاز حاصل از احتراق در فرآیند ذوب مواد و تاثیر آن بر کیفیت و عملکرد کوره امری اساسی می باشد گاها آلاینده ها ممکن است، به بخشی از فرآورده تبدیل شوند. دستگاه آنالیز گاز دودکش testo 350 می تواند برای دنبال کردن دو هدف اصلی شامل نظارت بر جو گاز مربوط به فرآیند برای اطمینان از کیفیت مطلوب محصولات فرآوری شده و تجزیه تحلیل اطلاعات گاز های فرآیند ، مانند طراحی داخلی کوره ، کنترل شعله ، دمای محصول و دمای کوره یا تامین هوای احتراق استفاده شود.
این آنالایزر گاز از نظر هزینه های عملیاتی و ایمنی به عملکرد بهینه سیستم های حرارتی کمک می کند. اندازه گیری گاز احتراقی در مشعل های صنعتی این آنالایزر برای هر کدام از سیستم های احتراق و سوختی استفاده می شود، برای گرم کردن ، تولید برق ، بخار یا آب گرمکن ها ، برای ذوب یا تصفیه برخی مواد ، جهت سوزاندن مواد زائد و ضایعات و غیره
یافتن بهترین روش ممکن برای مدیریت احتراق و سوزاندن قطعاً ناشی از دانش صحیح در مورد ترکیبات سوخت و هوای احتراق و ارتباط آنها با یکدیگر است غالبا نحوه ترکیب آنها نیز بسیار مهم است. فناوری های اندازه گیری پرتابل امکان تجزیه و تحلیل کلیه گاز ها و دستیابی به فرآیندهای احتراق بهینه را فراهم می کنند. هدف اصلی از استفاده از آنالایزر پرتابل گاز دودکش testo 350، آزمایش عملکرد های مناسب با محیط زیست از جمله سیستم های احتراق و استفاده بهینه از سیستم است. اندازه گیری میزان انتشار گازها در محیط عمدتا در هنگام بهره برداری از انواع کارخانه های صنعتی به عنوان مثال نیروگاه های بزرگ برق ، کارخانه های ذوب فولاد ، تولید سیمان ، شیشه گری و کارخانه های شیمیایی و تاسیسات وابسته ، این تاسیسات مشمول مقررات سختگیرانه مربوط به انتشار گاز های خروجی می شوند. این تولیدی ها مطابق با استاندارد مجاز به انتشار مقدار معینی گاز آلاینده هستند آنالایزر گاز های احتراقی testo 350 را می توان برای انجام یک تجزیه و تحلیل اولیه قبل و بعد از انتشار آلاینده ها بسته به دستورالعمل ها و استاندارد ها رسمی کشور و هر منطقه استفاده کرد.
Ideal for professional flue gas analysis and industrial emissions measurement on industrial engines, burners, gas turbines and in thermal processes: the testo 350 flue gas analyzer performs a variety of measuring and analysis tasks, impresses over the long term thanks to its heavy-duty industrial design and is also suitable for complex data acquisition.
The testo 350 flue gas analyzer comprises two units
The testo 350 Control Unit (separate product) with a clear graphic display, allows you to control emissions measurement. Operation is really easy: burner, gas turbine, engine and user-defined applications are available for selection in the menu. The Control Unit enables remote control of the analyzer unit even when there is a spatial separation of the flue gas pipe and the setting location – particularly recommended for emissions measurements on large plants.
The testo 350 analyzer unit is just what you need for carrying out emissions measurement, because it contains all the sensor technology and electronics. The testo 350 analyzer unit includes an O2 gas sensor as standard, but at least one additional sensor must be connected for commissioning (can be used with a maximum of 6 sensors). When connecting the optional sensors, you can choose between gas sensors for CO, CO2, NO, NO2, SO2, H2S or CxHy. The measuring range extension enables unrestricted measurements to be carried out, even when there are high gas concentrations. In order to protect the sensor technology, the measuring range extension (dilution) is automatically activated when there are unexpectedly high gas concentrations. The measuring range of a selected sensor can be extended by a specific factor. The service opening on the underside of the instrument allows fast access to all relevant serviceable and wearing parts, such as pumps and filters, enabling users to clean or replace these. In addition, the testo 350 has numerous instrument diagnosis functions. Instrument notifications are output in cleartext, making them easy to understand. The current status of the flue gas analyzer is constantly displayed.
Using the testo 350 analyzer unit
The analyzer unit can be operated with the Control Unit and it can also be used in direct combination with a PC/notebook and the easyEmission software (via USB, Bluetooth® 2.0 or CANCase). After programming, the analyzer unit can carry out measurements and save the results autonomously. It is also possible to display or transmit the measurement data from the analyzer unit to the Control Unit or software. To send the measurement report straight away, you can also use our free App which turns your Android smartphone or tablet into a display device for the analyzer unit.
testo 350 analyzer unit, equipped with O2, including differential pressure sensor, temperature probe input type K NiCr-Ni and type S, Pt10Rh-Pt, Testo data bus connection, rechargeable battery, integrated combustion air probe (NTC), trigger input, measurement data memory, USB interface, carrying strap kit and calibration certificate.
آنالایزر Chemist 600 برای اندازه گیری گازهای حاصل از احتراق و همچنین محاسبه واندازه گیری راندمان احتراق می باشد.
آنالایزر گازهای خروجی از دودکش های صنعتی سری 600 مدل Chemist 606X ساخت کمپانی Seitron ایتالیا
Chemist 600 analyzer open our series of instruments dedicated to industrial emissions analysis. Chemist 600 comes with built-in thermal printer, and it’s a compact, hand-held instrument, which can measure up to 6 different gases, which can be customized based on the type of application.
Chemist 600 analyzer features an external water trap with dust filter, a sucking pump and a second dilution pump for CO measurements up to 100.000 ppm. You can measure flue gas, external and ambient air temperatures, and positive, negative and differential pressure.
Thanks to Bluetooth connectivity, all the collected data can be transferred to Chemist Smart Analysis app for further analysis.
غبارسنج هوا برند تستو مدل TESTO 380
پارتیکل سنج گاز دودکش تستو مدل testo 380 شامل دو جزء سیستم است: شامل یک پراب سنجش غلظت ذرات ریز و نیز با دستگاه LL 2-330 به عنوان مرکز کنترل و آنالیز گاز دودکش سازگار است. این دستگاه سیستمی کامل، جمع و جور با قابلیت استفادۀ آسان است که برای سنجش دقیق غلظت انواع سوخت های جامد و نفت و گاز به کار می رود.
The constantly rising number of solid fuel systems is leading to an increase in the emission of particulate matter. The revised version of the 1st German Federal Emission Control Ordinance (BImSchV) presents new challenges for flue gas inspectors, heating engineers, and service engineers, when it comes to particulate matter measurement.
testo 380 fine particle measuring system – complete solution for solid fuel, oil, and gas systems
The testo 380 fine particle measuring system is comprised of two system components, the testo 380 fine particle measuring instrument, including particulate matter probe, and the testo 330-2G LL as a control center and combustion analyzer. This complete system is extremely compact, easy to use, and ensures accurate measurements on solid fuel, oil, and gas systems.
Advantages of the testo 380 fine particle measuring system
Suitability permit received for fuels 1-8, levels 1 and 2
Measurement system comprising of testo 380 fine particle measuring instrument and testo 330-2G LL combustion analyzer
The testo 380 fine particle measuring instrument allows you to carry out effortless and straightforward measurements directly on site
testo 330-2G LL combustion analyzer: System control center and combustion analyzer
Parallel measurement of particle matter, O2, and CO in real time
Charts used to show all required measuring values for an optimum overview
Particularly cost effective operation and maintenance
Effortless handling and easy transportation
Fully TÜV-tested for limit value levels 1 and 2 and in accordance with VDI 4206 Sheet 2
High tech in a portable case: Measurement of all relevant values with just one probe
testo 380 fine particle measurement instrument with particulate matter probe and cleaning set, testo 330-2G LL combustion analyzer with mains unit (incl. Bluetooth, H2-compensated CO cell), modular flue gas probe (length 300 mm, Ø 8 mm), and combustion air temperature probe (length 190 mm)