مشاهده سبد تسویه حساب
دستگاه زبری سنج SRT-5100 ساخت شرکت HUATECH با دقت 1 میکرون و رنج اندازه گیری از 1 تا 800 میکرون مناسب برای تست زبری (صافی) کلیه سطوح قبل از رنگ پاشی و پوشش دهی زبری یا صافی سطح میزانی برای تعیین بافت سطح است و با تعیین میزان تغییرات عمودی بر سطح نسبت به سطح صاف واقعی تعیین می شود .در صورتی که این تغییرات زیاد باشد سطح زبر و در صورت کم بودن نرم است .این کمیت نقش مهمی در تعیین اثر متقابل اشیاء با هم داشته و با دانستن آن بسیاری رفتارهای اجزاء مکانیکی قابل پیشبینی خواهد بود .برای مثال اشیاء زبر بیشتر در معرض خوردگی و ترک دار شدن هستند .برای اندازه گیری زبری از روش های تماسی و غیر تماسی مختلفی استفاده می کنند .
SRT-5100 دستگاه زبری سنج مدل دارای طراحی زیبا و سایز کوچک جهت حمل و نقل می باشد.این دستگاه زبری سنج دارای دقت بسیار بالا می باشد.این زبری سنج امکان اندازه گیری تابع متریک و امپریال را به کاربر می دهد.
مشخصات فنی دستگاه SRT-5100 ساخت HUATECH:
سنسور اندوکتانس با دقت بالا
طراحی زیبا، کوچک با استفاده آسان
با قابلیت محاسبه متوسط ، حالت اندازه گیری متریک و امپریال
زبری سنج صافی سنج برند دفلسکو defelsko SPG1 زبری سنج دفلسکو مناسب برای سطوح سندبلاست یا شات بلاست میباشد.
مشخصات فنی
ساخت کشور آمریکا
رنج اندازه گیری : 0تا 500 میکرون
دقت بالا
پراب سرخود
دیگر مشخصات: PosiTector SPG1
Digital depth micrometer measures and records peak to valley surface profile heights
دستگاه زبری سنج الکومتر E224C-BI
جهت اندازه گیری سطوح سندبلاست یا شات بلاست میباشد
دارای دو نوع پراب جدا و پراب سرخود میباشد.
مشخصات فنی :
ساخت کمپانی الکومتر انگلستان
دیجیتال
قابلیت سیو 5 داده آخر
نوع بیسیک
Elcometer 224 Digital Surface Profile Gauge
The Elcometer 224 provides the very latest in surface profile measuring technology for measuring profile on either flat or curved surfaces.
Fast and reliable peak-to-valley surface profile measurement
Accurately measure surface profile on flat or curved surfaces up to 500μm (20mils)
Measures both average peak-to-valley and average maximum peak-to-valley height
Portable, rugged hand-held design is ideal for field use
Large buttons ideal for gloved hands
Easy to use menus in multiple languages
High contrast colour LCD with auto rotate
High and low reading limit indicators
Factory calibrated for immediate use
زبری سنج مدل SRT5030 HUATEC
دستگاه زبری سنج سطوح ماشین کاری شده مدل SRT5030 ساخت شرکت HUATEC چین قابلیت اندازه گیری زبری سطوح در 4 پارامتر با صفحه نمایش رزولوشن بالا، در دو صفحه نمایش، به همراه پلیت نمونه با شارژر همراه و قابلیت ریشارژ، در بسته بندی منحصر به فرد با دفترچه راهنما، دارای گارد محافظ تیغه اصلی، کاربری آسان، دقت بالا، داشتن حالت آیرودینامیکی مناسب و خوش دست
جزئیات زبری سنج هواتک مدل SRT5030
قابلیت اندازه گیری زبری سطوح در 4 پارامتر با صفحه نمایش رزولوشن بالا،در دو صفحه نمایش،به همراه پلیت نمونه با شارژر همراه و قابلیت ریشارژ، در بسته بندی منحصر به فرد با دفترچه راهنما، با قابلیت آپشنال اضافه شدن سفارشی کاربری بلوتوثی و وايرلس گوشی ،8 گیگ حافظه داخلی دستگاه، دارای گارد محافظ تیغه اصلی، کاربری آسان، دقت بالا، داشتن حالت آیرودینامیکی مناسب و خوش دست
Parameters: Ra, Rz, Rq, Rt
Ra, Rq 0.05 - 10 micrometer
Rz, Rt 0.1 - 50 micrometer
Standards: ISO, DIN, ANSI, JIS
Operation: 2 Start Keys ( The Left Key & The Right Key) To Satisfy The Different Using Habits
Battery: Built-in Lithium Ion Rechargeable Battery And A Charging Control Circuit, High Capacity
Memory: 8G Original Data And Waveform
Bluetooth: Bluetooth Capability , Support Wireless Connection With Mobile And Mini Printer
Product Name: Surface Roughness Tester
Application: Surface Roughness Testing Instrument
Dimension: 140×52×48
Weight: 440g
زبری سنج دیجیتال HUATEC مدل SRT 6600
زبری سنج دیجیتال ساخت هوآتک مدل SRT6600
-قابلیت اندازه گیری 19 نوع پارامتر زبری شامل:
Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm,RSk, Rmr, Rpc, Rk, Rpk, Rvk, Mr1, Mr2
نوع اندازه گیری: METRIC um,Imperial uinch
محدوده اندازه گیری: Ra: 0.025~12.5μ m
دقت اندازه گیری: ≤±10%
دارای خروجی RS232 برای اتصال به کامپیوتر یا پرینتر
قابلیت Auto-off بعد از 5 دقیقه به همراه ذخیره اطلاعات
نوع شارژ: LI-ION BATTERY RECHARGEABLE
به همراه نرم افزار مربوطه
Quick Details
Place of Origin:
Beijing, China
Brand Name:
HUATEC
Model Number:
SRT-6600
Power:
Electronic
Parameters:
Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx;
Measuring Range:
Ra(0.005μm ~ 16μm)
Measuring Range 1:
Rz(0.02μm ~ 160μm),
Display:
28 x 64 OLED dot matrix display, digital / graphic display
Test Principle:
Current induction
Radius of Probe Pin:
5um
The guide head vertical radius:
45mm
The maximum driving trip:
17.5mm/0.7inch
Sampling length(lr):
0.25,0.8,2.5mm
Functions and features:
1.Electromechanical integration design, small volume, light weight, easy to use;
2.Using DSP chip to control and data processing, high speed, low power consumption;
3.Large range, parameters Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx;
4.128 x 64 OLED dot matrix display, digital / graphic display; highlight no perspective;
5.Display information rich, intuitive, can display all the parameters and spectrogram graphics;
6.Compatible with ISO, DIN, ANSI, JIS national standards;
7.Built-in lithium ion rechargeable battery and a charging control circuit, high capacity, no memory effect;
8.Residual quantity indicator icon, prompting the user to charge;
9.Display of the charging process instructions, the operator can understand the degree of charge
10.Working time more than 20 hours of continuous work
11.Large capacity data memory, can store 100 groups of original data and waveform.
12.Real-time clock settings and display, convenient data recording and storage
13.With automatic dormancy, automatic shutdown and power saving function
14.Reliable control motor to go dead circuit and software design
15.Measurement information display, menu prompt information, false information and switch machine and other tips that information;
16.Full metal shell design, sturdy, compact, portable, high reliability.
17.Can be connected to a computer and printer;
The performance index of sensor:
The detection principle
Measuring range
160 μm
Tip radius
5 μm
Tip material
Diamond
Stylus force
4mN(0.4gf)
Stylus angle
90°
The guide head vertical radius
Technical parameters:
Item
Description
The maximum driving trip
Indicating error
Not more than ± 10%
Variation of indication
Not more than 6%
The measured profile
Roughness, waviness, the original contour
Parameter
Ra(0.005μm ~ 16μm),
Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx.
Filter
RC,PCRC,Gauss,ISO13565
The sampling length L
0.25mm,0.8mm,2.5mm,8mm
Evaluation length L
(1-5)l
Internal storage capacity
100 groups of original data
External input / output interface
USB
Electric source
Built-in rechargeable lithium ion battery or external power adapter
زبری سنج الکومتر E224C-BI
دستگاه دیجیتال اندازه گیری زبری سطح پراب سرخود مدل 224نوع B با زبان فارسی با قابلیت کامل اماری و گستره اندازه گیری 0 تا 500 میکرون و قدرت تفکیک 1 میکرون ، دارای استاندارد محیطی IP64 و حافظه ذخیره 5 خوانده به همراه تجهیزات جانبی شامل : کیف حمل کمری ، بلوک تنظیم صفر ، فویل های تست کالیبراسیون ، باتری و دفترچه راهنما به شماره فنی E224C-BI ساخت شرکت ELCOMETER انگلستان
رنج اندازه گیری 0 تا 500 میکرون
دقت 0.5 درصد
منوی زبان فارسی
صفحه نمایش TFT با نور پس زمینه روشن
قابلیت کامل آماری
The Elcometer 224 surface profile meter is available in two different models: Model B and Model T. Each surface profile gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication. Standard and armoured probes are available for the separate models, providing even greater measurement flexibility. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils (nominal values 125µm (5.0mils) & 500µm (20mils)) and an Elcometer Test Certificate.
دستگاه تست زبری سطح Elcometer 7061 یک راه حل اندازه گیری قابل حمل و سبک برای محدوده اندازه گیری زبری سطح است که برای رعایت استانداردهای بین المللی مورد نیاز است.
اندازه گیری زبری سطح بر حسب Ra ، Rz یا Tp بیان می شود. این مقادیر شامل اندازه گیری مشخصات قله به دره در ترکیب با ارزیابی فراوانی قله ها در منطقه نمونه است.
دستگاه تست زبری سطح Elcometer 7061 برای ارزیابی شرایط زبری سطح در طیف وسیعی از کاربردهای عمومی صنعتی مناسب است. به ویژه در مواردی که نمونه برای آزمایشگاه زیاد است.
اندازه گيري پارامتر هاي Vo, A2, A1, Mr2, Mr1, Rvk, Rk, Rpk ,Rpm, Rp, Rmax, Ry, Rz, Rq, Ra, Rx, RAr, RSm, Tp, Rmr, RPc, R3z, Rt خروجي RS232 و USB ذخيره ۱۵ فايل و ۲۰۰۰۰ داده قابليت اتصال پراب هاي مختلف مناسب با سطوح Curve و غير قابل دسترس و حفره ها
The Elcometer 7061 surface roughness tester is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.
In protective coating applications there is a requirement to measure surface roughness.
Measurements of surface roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area.
The Elcometer 7061 surface roughness tester is suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory.
Multi-Lingual Display: All the required information is displayed on screen in a choice of 14 languages.
Flexible: Can be used in virtually any position; horizontally, vertically, upside down. A height adjustment accessory to accommodate various sample sizes is supplied with each gauge as standard.
Integrated Calibration Standard: No external calibration standard is required; provides greater ease of use.
Drive Unit: Can be rotated and moved longitudinally; enables the stylus pick-up to be moved to the calibrating position. The stylus pick-up is also protected for transport in this position.
Stylus pick-up with removable protection: 2µm (80µin) diamond stylus tip with a measuring force of 0.7 mN. Different stylus’ are available for various applications.
How to use a surface roughness tester
Surface roughness testers consist of a stylus which is mechanically drawn across the surface recording an 'image' of the surface roughness across a pre-defined sample length. The measurement technique provides a number of measurement parameters including:
Rmax: The greatest distance between the highest peak and lowest valley over the sampling length.
Ra: The average surface roughness over the sampling length.
Rt: The distance between the highest peak and the lowest valley within any given sampling length.
Rz: The average distance between the highest peak and the lowest valley over a number of sampling lengths.
زبری سنج دیجیتال برند الکومتر برند ELCOMETER E224C-TI
زبری سنج دیجیتال الکومتر Elcometer E224C در قالب چهار دستگاه طراحی می شود. مدل های این دستگاه بدین قرار می باشد: E224C-BI، E224C-BS، E224C-TI، E224C-TS. تفاوت مدل را به این صورت مشخص می کنیم. حرف B و T نشان دهنده basic و top بودن دستگاه هاست که مدل top قابلیت ترسیم پروفایل یا گراف را دارد.حروف i و s به همین پراب سرخود و پراب جدا می باشد.
زبری سنج و صافی سنج الکومتر مدل ELCOMETER E224C-Ti دستگاهی است جهت سطوح بلست شده. دستگاه زبری سنج (صافی سنج) الکومتر 224 TOP با طراحی زیبا و قابل حمل در دو نوع پراب سرخود و پراب جدا طراحی شده است
ویزگی های زبری سنج و صافی سنج الکومتر مدل ELCOMETER E224C-Ti
سيستم ديجيتال با صفحه نمایشگر رنگی
محدوده كاري 0 تا 500 ميكرون
دقت بالای یک میکرون
اندازه گيري مشخصه هاي آماري مانند تعداد عدد خوانده شده، ميانگين اعداد، انحراف معيار و ...
داراي حافظه ذخيره اطلاعات و امكان انتقال داده ها به كامپيوتر
كاليبراسيون بسيار راحت
سوزن فرورونده قابل تعويض
Fast, accurate and very user friendly, the Elcometer 224 is available in two different models: Model B and Model T. Each gauge provides users with increasing functionality - from the entry level Model B, to the top level Model T, with memory, alpha-numeric batching and Bluetooth® communication.
Integral gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during measurement - allowing for consistent, repeatable and accurate results.
زبری سنج برند الکومتر مدل ELCOMETER E224C-BS
دستگاه دیجیتال اندازه گیری زبری سطح پراب جدا مدل 224 نوع BASIC با قابلیت کامل اماری و گستره اندازه گیری 0 تا 500 میکرون و قدرت تفکیک 1 میکرون ، دارای استاندارد محیطی IP64 و حافظه ذخیره 5 خوانده به همراه پراب کابلی استاندارد و تجهیزات جانبی شامل : کیف حمل کمری ، بلوک تنظیم صفر ، فویل های تست کالیبراسیون ، باتری و دفترچه راهنما به شماره فنی E224C-BS ساخت شرکت ELCOMETER انگلستان
ساخت کمپانی Elcometer انگلستان
مدل پراب جدا و بیسیک
محدوده اندازه گیری: 0 تا 500 میکرون
دقت:5± میکرون
قدرت تفکیک: 1میکرون
خوانش سریع داده ها با بیش از 50 خوانش در دقیقه همراه با کاربری راحت منو با بیش از 30 زبان
ضدضربه، آب، گرد و خاک و لمس
صفحه نمایش :روشن با نور پس زمینه، color TFT display 2.4”
حافظه دستگاه: 5 داده از آخرین خوانش ها
باتری 2* AA، طول عمر باتری 24 ساعت استفاده مداوم
دمای کاربری: 0-50 درجه سانتیگراد
Measurement capability to ±5%
Resolution: 1 μm (0.1 mm)
Accuracy: ±5% or ±5 μm (±0.2 mm)
Can be used in accordance with National and International Standards
Temperature stable measurements
Statistics are calculated and displayed in real time
Live and batch readings graph format for instant analysis
Repeatable and reproducible measurements
2 year gauge warranty
Supplied with fully traceable Test Certificates
Batch & individual readings are date and time stamped
Sealed, heavy duty and impact resistant
Dust and waterproof equivalent to IP64
Suitable for use in harsh environments
Scratch and solvent resistant display
Durable gauge and probe construction
Fast reading rate of 50+ per minute
Integral and separate probe versions to suit your application
Alpha numeric batch identification
Compatible with ElcoMaster® and ElcoMaster® Mobile App
Powersave mode with tap awake
زبری سنج برند الکومتر مدل ELCOMETER E224C-TS
دستگاه دیجیتال اندازه گیری زبری سطح پراب جدا مدل 224 نوع TOP با قابلیت کامل اماری و گستره اندازه گیری 0 تا 500 میکرون و قدرت تفکیک 1 میکرون ، دارای استاندارد محیطی IP64 و حافظه ذخیره 5 خوانده به همراه پراب کابلی استاندارد و تجهیزات جانبی شامل : کیف حمل کمری ، بلوک تنظیم صفر ، فویل های تست کالیبراسیون ، باتری و دفترچه راهنما به شماره فنی E224C-TS ساخت شرکت ELCOMETER انگلستان
تعداد دسته:2,500
حافظه داخلی:1,500
The Elcometer 224 provides the very latest in surface profile measuring technology for measuring profile on either flat or curved surfaces. Fast, accurate and very user friendly, the Elcometer 224 Surface Profile Gauge is available with or without memory and Bluetooth®. The Elcometer 224 surface profile meter is available in two different models: Model B and Model T. Each surface profile gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication. Standard and armoured probes are available for the separate models, providing even greater measurement flexibility. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils (nominal values 125µm (5.0mils) & 508µm (20mils) and an Elcometer Test Certificate.
Fast, accurate reading rate; 50+ readings per minute-
Repeatable & reproducible measurements-
Easy to use menu structure; in 30+ languages-
Gauge memory 1,500
Tough, impact, water & dust resistant; equivalent to IP64-
Bright colour screen; with permanent back light-
Scratch & solvent resistant display; 2.4” (6cm) TFT-
Large positive feedback buttons-
USB power supply; via PC-
2 year gauge warranty (The Elcometer 224 is extendable within 60 days from date of purchase, free of charge, to 2 years)-
Automatic rotating display; 0°, 90°, 180° & 270°-
Ambient light sensor; with adjustable auto brightness-
Emergency light mode-
Gauge software updates; via ElcoMaster® software (Internet connection required)-
Data output-
Bluetooth®: to computer, Android™ & iOS devices-
دانه بندی رنگ نشان دهنده میزان آسیاب شدن ذرات پیگمنت است. غالبا دانه بندی بر کیفیت رنگ تاثیرگذار است و رنگ در یک دانه بندی بهینه نتیجه خوبی می دهد. البته به طور معمول میزان دانه بندی به تنهایی دلیلی بر رد یا قبولی رنگ نمی باشد.
کاربرد: جهت تعیین سایز ذرات و ریز دانه های بیشتر مواد مثل رنگ ها، لاک ها، مواد رنگی ، فیلرهاو ...
مدل : دو شیاره با شیب های درجه بندی در 3 مقیاس µm (micron), PCU (North), NS(Hegman)
کمپانی سازنده TQCهلند و NEURTEKاسپانیا
The TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc..
TQC Grindometers are available in three models:
Double grooves with graded slopes graduated in different parameters: Microns, NS (Hegman) and PCU (North)
Single wide groove with parameters: Microns and Hegman
Single groove with only Microns
گرایندومتر تک کاناله و دو کاناله استیل ساخت چین
گرایندومتر 0 تا 100 میکرون دوشیاره ساخت ایران
زبری سنج برند تمتک مدل TMR-200
حداکثر رانندگی : 17.5 میلی متر/0.7 اینچ نشان دادن خطا : بیش از 10 ± تنوع نشانگر : بیش از 6 مشخصات اندازه گیری شده : ناهمواری ، مواج بودن ، کانتور اصلی پارامتر :Ra (0.005μm ~ 16μm) ، Rz (0.02μm ~ 160μm) ، Rq ، Rt ، Rp ، Rv ، R3z ، R3y ، RzJIS ، Rsk ، Rku ، Rsm ، Rmr ، Rx فیلتر : RC ، PCRC ، Gauss ، ISO13565 طول نمونه برداری L : 0.25 میلی متر ، 0.8 میلی متر ، 2.5 میلی متر ، 8 میلی متر طول ارزیابی L :(1-5) l ظرفیت ذخیره سازی داخلی : 100 گروه از داده های اصلی رابط ورودی / خروجی خارجی : USB منبع الکتریکی : باتری لیتیوم یون قابل شارژ یا آداپتور برق خارجی
Electromechanical integration design, small volume, light weight, easy to use
Using DSP chip to control and data processing, high speed, low power consumption
.Large range, parameters Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx
128 x 64 OLED dot matrix display, digital / graphic display; highlight no perspective/Display information rich, intuitive, can display all the parameters and graphics
Compatible with ISO, DIN, ANSI, JIS national standards
Built-in lithium ion rechargeable battery and a charging control circuit, high capacity, no memory effect
Residual quantity indicator icon, prompting the user to charge
Display of the charging process instructions, the operator can understand the degree of charge
Working time more than 20 hours of continuous work
More practical functions ready to be found
Technical parameter
The maximum driving trip---17.5mm/0.7inch
Indicating error---Not more than ± 10%
Variation of indication---Not more than 6%
The measured profile---Roughness, waviness, the original contour
Parameter---Ra(0.005μm ~ 16μm),Rz(0.02μm ~ 160μm),Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx.
Filter---RC,PCRC,Gauss,ISO13565
The sampling length L---0.25mm,0.8mm,2.5mm,8mm
Evaluation length L---(1-5)l
Internal storage capacity---100 groups of original data
External input / output interface---USB
Electric source---Built-in rechargeable lithium ion battery or external power adapter
Standard Configuration
Main body---1
Standard sensor---1
Reticle temp-let---1
Template support---1
Movable support---1
Power adapter---1
USB charging cable---1
instrument container---1
زبری سنج برند هواتک مدل SRT5100S
زبری یا صافی سطح میزانی برای تعیین بافت سطح است و با تعیین میزان تغییرات عمودی بر سطح نسبت به سطح صاف واقعی تعیین می شود .در صورتی که این تغییرات زیاد باشد سطح زبر و در صورت کم بودن نرم است .این کمیت نقش مهمی در تعیین اثر متقابل اشیاء با هم داشته و با دانستن آن بسیاری رفتارهای اجزاء مکانیکی قابل پیشبینی خواهد بود .برای مثال اشیاء زبر بیشتر در معرض خوردگی و ترک دار شدن هستند .برای اندازه گیری زبری از روش های تماسی و غیر تماسی مختلفی استفاده می کنند .
رنج اندازه گیری:0 تا 800میکرون
دقت:±5میکرون
دمای کارکرد:0تا50درجه سانتی گراد
رطوبت:80%
خاموش شدن دستی یا خودکار
تبدیل متریک/امپریال
با تابع محاسبه میانگین
دارای کابل USB
ابعاد:126x65x28 mm
وزن:80گرم
Application
This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces. It is widely used in field of blast cleaned surface measurement.
Feature
It meets the standards of ASTMD-4417-B, IMOMSC.215(82), SANS5772, US Navy NSI 009-32, US Navy PPI-63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field. Cost per test is significantly lower than other test methods Small in size, light in weight and easy to use Manual or automatic power off Metric/Imperial Conversion With average calculation function Separate Probe Use USB data output to connect with PC Provide Bluetooth data output choice
Specification
Standard
Accessories
Optional
زبری سنج برند AMITTARI مدل AR-131A
دستگاه زبری سنج یا صافی سنج آمیتاری AMITTARI یک دستگاه رافنس گیج سطح ساخت کشور چین میباشد که جهت استفاده در سطوح سندبلاست استفاده میگردد.
از مهمترین ویژگی های این زبری سنج سطح طراحی ارگونومی قسمت بالای دستگاه برای انجام یک تست مناسب و بدون لرزش میباشد و دیگر آنکه با دارا بودن صفحه بزرگ نمایش اعداد و دقت بسیار مناسب توانسته ویژگی های منحصر به فردی را نسبت به دستگاه های دیگر زبری سنج سندبلاست داشته باشد.
رنج اندازه گیری:0-750میکرون
رزولشن:1µm
دقت:±5%
رطوبت عملیاتی:<80%RH
ابعاد:176x63x25 mm
وزن:310g
Product Description
The Surface Profile Gauge used in Shot blasting industry, the printing industry, Spraying Anti Corrosion Industry, According to the selected measurement conditions are calculated from the corresponding parameters, in the liquid crystal display clearly shows all the measured parameters.
Product Feature
Integrated design, small volume, light weight, simple structure, easy to use, Intuitive readings and automatic shutdown function
Public and imperial units converted, with the average computing power
With a mean value calculation, undervoltage alarm indicator function
Direct measurement of the surface peak-trough height
Use USB data output with connection PC
Provide Bluetooth data output choice
Resolution
1µm (0.1 mils)
Range
0 µm ~ 750µm/(0mils to 29.5mils)
Measurement Speed
>30 (readings per minute)
Accuracy
±5% or ±5 µm ( whichever is the greater)
Operating Temperature
0~ 50
Operating Humidity
<80%RH
Size
176x63x25 mm
Power Supply
2x1.5vAAA Um-4 Battery
Weight
310 g (Not including batteries)