مشاهده سبد تسویه حساب
ضخامت سنج التراسونیک مدل +CYGNUS 6
حالت اندازه گیری:
Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick. Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick. Single-Echo using 1 echo
متریال:
Velocities from 1,000 – 9,000 m/s
دقت:±0.05میلی متر
رزولشن:0.1 میلی متر
محدوده اندازه گیری روی فولاد:
0.8 – 250 میلی متر
Key Features of the Cygnus 6+ PRO UTG
Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
Echo-Echo and Single-Echo modes for heavily corroded metals with a thin or no coating
Temperature Compensation feature for measurement on hot materials
Deep Coat function ignores coatings up to 20 mm (0.8 inch) thick
Manual and automatic gain control
Min/max measurement limit functions with visual and vibrate alert
Uses single and twin crystal probes
Freeze function
One and two point calibration
Bluetooth™ for data transfer
Large front LCD display and an end-mounted LCD display with grayscale setting for bright sunlight
Safe operation in explosive atmospheres: Class 1, Division 2, Group D locations only, as defined in NFPA 70, Article 500
Water and dust tight IP67 housing
Shock and impact proof to US MIL STD 810G.
High Temperature Measurement
Comprehensive Data Logging
Three Versatile Measuring Modes
Multiple-Echo mode uses three error checked back wall echoes to provide the most reliable and accurate remaining thickness measurements, with no need to remove coatings (up to 20 mm thick (0.8 inch))
Single-Echo mode is ideal for measuring uncoated metals with heavy front and/or back-wall corrosion. Also effective on a range of cast metals, plastics and composites
Echo-Echo mode works best for measuring heavily corroded metals through thin coatings of up to 1 mm (0.04 inch) thick, ideal for measuring painted metals with heavy back wall corrosion.
Measuring Modes
Materials
Velocities from 1,000 – 9,000 m/s (0.0390 – 0.3543 in/us)
Accuracy
±0.05 mm (±0.002 inch) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on ±0.1 mm (±0.004 inch) or 0.1% of thickness measurement whichever is the greatest – in Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the same material as calibrated on
Resolution
Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch) Single-Echo and Echo-Echo modes – 0.1 mm (0.005 inch) or 0.01 mm (0.001 inch)
Probe options
Single crystal probes, Twin crystal probes and High temperature probe
Measurement Range in Steel
0.8 – 250 mm (0.031 – 10 inch) depending on selected probe and configuration, material and temperature
Connector
Lemo 00
Power
AA / R6 batteries
Battery Life
10 hours continuous measurement
Electronics
Dual channel pulser
Display
2.4 inch QVGA LCD and end-mounted rotatable LCD 25.58 x 6.38 mm
Size
84.130.35
Weight
300 g (10.5 oz) (inc. Batteries)
Operating Temp.
10°C to 50°C (14°F to 122°F)-
Data Logging
5,000 measurements and A-scans per record Max number records: 100 (soft limit)
Computer Software
CygLink allows remote logging and viewing of A-scan graphs Survey and report generation to PDF file Graphic analysis of data and statistical calculations
Environmental Rating
IP67 Safe operation in Explosive Atmospheres: Class I, Division 2, Group D Locations only, as defined in the National Fire Protection Association Code (NFPA 70), Article 500. Tested using MIL-STD-810G, Method 511.5, Procedure I MIL STD 810G Method 501.6 (high temp +55°C (131°F)) MIL STD 810G Method 502.6 (low temp -20°C (-4°F)) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion 1 metre for 30 mins)
Shock and Impact
MIL STD 810G Method 514.7 (vibration) MIL STD 810G Method 516.7 (shock 20g) MIL STD 810G Method 516.7 (transit drop 1.22 m)
Standards
Designed for EN 15317
Compliance
CE, UKCA, RoHS
ارائه راهکارها و شرایط سخت تایپ به پایان رسد وزمان مورد نیاز شامل حروفچینی دستاوردهای اصلی و جوابگوی سوالات پیوسته اهل دنیای موجود طراحی اساسا مورد استفاده قرار گیرد.