مشاهده سبد تسویه حساب
براقیت سنج چیست؟
براقیت سنج یا گلاس میتر GLOSSMETER دستگاهی است که در یک یا چند زاویه مشخص پرتویی از نو را به سطح می تاباند و از مقدار و میزان جذب نور و اندازه گیری آن بر حسب درصد نسبت تابش به انعکاس میزان براقیت سطوح را محاسبه می نماید.
براقیت سنج الکومتر مدل Elcometer 480 ساخت کشور انگلستان دارای ویژگی های زیر می باشد:
زاویه های اندازه گیری 20 ، 60 ، 85 درجه دستگاه گلاس متر
توانایی اندازه گیری پارامتر های آماری
سهولت در استفاده از دستگاه
200 حافظه ذخیره داده در هر زاویه مورد نظر
ابعاد دستگاه 65*140*50میلی متر
وزن 790گرم
Gloss is measured by directing a constant intensity light beam, at a fixed angle, on to the test surface and then monitoring the amount of reflected light from the same angle. This specular reflectance is measured using a glossmeter.
Different surfaces require different reflective angles.
All three angles should be recorded (20, 60 & 85°) when measuring gloss on anodised metals to ensure a complete understanding of the specular reflectance between the coating and the metal substrate. Gloss Range 60° value Measure with
High Gloss > 70GU 20° Semi Gloss 10 – 70GU 60° Low/ Matt < 10GU 85°
The Model Range
The Elcometer 480 is available as either a simple entry level 60° glossmeter or
state of the art Single, Dual or Triple angle variants.
Single: 60° Dual: 20° & 60° Triple: 20°, 60° & 85° Memory and Batching
Store 40,000 date and timed stamped readings in up to 2,500 user definable alpha-numeric batches.
Readings can be transferred to PC, iPhone, Android™ or other mobile devices
via USB or Bluetooth® for instant reporting using ElcoMaster® software.
Display Modes
Fully customisable, scratch and solvent resistant colour LCD allows the user to
display:
Gloss, % Reflectance or Haze readings Statistics Readings and Differential with pass/fail Trend Graph Analogue Scan Bar Standard, Auto Repeat & Scan Modes
No two inspections are the same. It is for this reason that the Elcometer 480
is equipped with three measurement modes:
Standard Mode: Press the measure button to take an individual spot measurement.
Auto Repeat Mode: When the glossmeter is slid over the surface a measurement of all three angles is automatically taken at a user definable
rate between 10 – 180 readings per minute. When enabled all the
individual readings are stored into memory.
Scan Mode: As the glossmeter slides over the entire surface area the gauge measures all three angles at a continuous rate of 10 readings
per second. When stopped, the gauge displays and stores the average,
highest and lowest values – ideal for checking a sample’s overall uniformity
ارائه راهکارها و شرایط سخت تایپ به پایان رسد وزمان مورد نیاز شامل حروفچینی دستاوردهای اصلی و جوابگوی سوالات پیوسته اهل دنیای موجود طراحی اساسا مورد استفاده قرار گیرد.