مشاهده سبد تسویه حساب
عیب یاب التراسونیک برند سوناتست مدل PRISMA
رسم منحنی DAC مطابق استاندارد ASME
ارزیابی عیوب مطابق استاندارد AWS D.1.1
قابلیت نصب و اتصال Encoder جهت مشخص کردن موقیعت حرکت پراب روی قطعه و ثبت دقیق محل عیب
دارای صفحه کلید لمسی و فشاری جهت اپراتوری سریع و آسان
ذخیره کلیه مراحل بازرسی در حافظه دستگاه و مشاهده آن
امکان گزارش گیری و ارزیابی نتیجه آزمایش در خود دستگاه
نمایش سه بعدی مسیر صوت
دارای 3 خروجی USB
دارای خروجی VGA
دارای اتصال به شبکه داخلی (خروجی LAN) و WiFi
استاندارد حفاظت محیطی IP 66
نوع اتصال دستگاه Lemo 1
صفحه نمایش رنگی 8.4اینچ
نرم افزار داخلی DGSجهت ارزیابی اندازه عیب
نمایش همزمان (PHASSED ARRAY)A,B,C,L,S-CAN
دارای 2کانال UTجهت نمایش همزمان اسکن های مجزا
متعلقات همراه : دستگاه ، باطری ، شارژر و کابل شارژر ، سرتیفیکت، بطری ژل کوپلنت،کیف برزنتی، نرم افزار و کابل اتصال به کامپیوتر ، کاور محافظ صفحه نمایش
The prisma is an advanced ultrasonic flaw detector offering the technician an extremely comprehensive tool for test and measurement, which can be upgraded to include TOFD and Phased Array capability. An upgrade can be carried out wherever you are, there is no need to return the instrument, eliminating any downtime. Simple controls, superior performance, advanced features and a rugged enclosure deliver simplicity, capability and reliability to the technician’s finger tips. With the best display size and resolution in it’s category, the prisma provides the end user with an intuitive and workflow driven interface, excellent imaging capability uses the Full screen mode allowing 100% of the display to be used for Scan Imaging. Numerous palettes are accessible for all scan types “see things how you want to”, in amplitude or depth C-Scans, customise your palettes. Take full advantage of the advanced display modes which include smoothing, contouring and averaging all available to enhance your signal quality. The prisma is constructed to exacting standards using a rigid, shock mounted, internal chassis surrounded by an impact absorbing enclosure and designed to meet IP66; which ensures the unit is fully sealed against fine dust and jets of water. Typical applications are broad but include Weld Inspection, Corrosion Mapping, Aerospace and Composite Testing.
Prisma UT
The Prisma UT model is fully loaded, carrying all the basic and advanced features of the Sonatest flaw detector range. Prisma UT offers damping control to either optimise near surface resolution or energy transmission. The ability to capture screens is standard combined with automatic reporting capability which enables reports to be formatted with relative bespoke customer information such as logos etc. The most popular flaw sizing techniques such as DAC, AVG/DGS, TGC and AWS are all on-board. Thanks to the on-board B and C-Scan imaging capabilities, the Prisma UT enables field technicians to conduct dedicated corrosion and composite inspections, together with comprehensive on-site thickness profiling.
Prisma TOFD
Ultrasonic Time of Flight Diffraction (TOFD) has gained in popularity over the last decade and via the Prisma TOFD, Sonatest brings to the market a truly portable and powerful TOFD unit. Knowing that TOFD inspection can be carried out on wall thickness as thin as 6mm (1/4”), the Prisma offers the best digitizing frequency of its category going up to 200MHz. Simply put this means that high frequency transducers can be used, ensuring the most accurate flaw height sizing possible. TOFD is a versatile technique; with two UT channels the Prisma permits the inspection of thick component in a single pass. This is enhanced by the high voltage square wave pulsers delivering up to 450V, cutting the need for an external pre-amplifier. Prisma TOFD offers the complete hardware configuration to deliver the best performance, but it would be incomplete without the on-board software features such as hyperbolic cursors, lateral wave straightening and lateral wave removal.
Prisma PA Ultrasonic Phased Array technology has become the established method for advanced NDT testing applications. Phased Array Techniques allow the user to cover a wider volume of inspection; such as being able to cover the complete span of a weld without the need to move or reposition the transducer. This is possible due to phased array enabling beams to be electronically steered. This technique results in comprehensive imaging of the results showing a quasi cross section of the inspected part. With the Prisma PA you can switch easily and quickly between the UT and PA operating modes with a simple press of a button, no data or time is lost. The Inspection Plan shows the operator in 2D and 3D where probes are positioned on the test part, simplifying the inspection set up and providing an inspection reference for reporting. All adjustments to focal laws are instantaneous. Multiple sectorial scans, true top, side and end view extractions, together with C-Scans, are all supported.
ارائه راهکارها و شرایط سخت تایپ به پایان رسد وزمان مورد نیاز شامل حروفچینی دستاوردهای اصلی و جوابگوی سوالات پیوسته اهل دنیای موجود طراحی اساسا مورد استفاده قرار گیرد.