مشاهده سبد تسویه حساب
ضخامت سنج التراسونیک برند تمتک مدل TM210B
قابلیت انجام اندازه گیری بر روی طیف وسیعی از مواد، از جمله فلزات، پلاستیک، سرامیک، کامپوزیت ها، اپوکسی ها، شیشه و سایر مواد رسانای امواج اولتراسونیک
مدلهای مبدل برای کاربردهای خاص، از جمله برای مواد دانه درشت و کاربردهای دمای بالا در دسترس هستند
عملکرد Probe-Zero، Sound-Veloctiy-Calibration تابع
تابع کالیبراسیون دو نقطه
نشانگر وضعیت کوپلینگ که وضعیت کوپلینگ را نشان می دهد
اطلاعات باتری ظرفیت باقی مانده باتری را نشان می دهد
عملکرد خواب خودکار و خاموش شدن خودکار برای حفظ عمر باتری
نرم افزار اختیاری برای پردازش داده های حافظه در رایانه شخصی
رنج اندازه گیری:
0.75mm-300.0mm (0.03inch-11.8 inch)
سرعت صوت: (1000m/s~9999m/s (0.039~0.394in/µs
دقت به میلی متر:
(%0.5+0.02Thickness)±
Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials
Transducer models are available for special application, including for coarse grain material and high temperature applications
Probe-Zero function, Sound-Veloctiy-Calibration function
Two-Point Calibration function
Coupling status Indicator showing the coupling status
Battery information indicates the rest capacity of the battery
Auto sleep and auto power off function to conserve battery life
Optional software to process the memory data on the PC
Optional thermal mini-printer to print the measured data via USB port
Adjust gain function ,can easy to test the cast iron material
Probe optional for ultrasonic thickness gauge
Model
Freq. MHz
Diam. Min.
Measuring range
Lower limit
Description
TM-12
2
14
3.0mm-300.0mm (in steel)
20
For thick, highly attenuating, or highly scattering materials
TM-08
5
10
1.2mm-230.0mm (in steel)
¢20mm×3.0mm
Normal measurement
TM-08/90
TM-06
7
6
0.75mm-80.0mm (in steel)
¢15mm×2.0mm
For thin pipe or small curvature pipe wall thickness measurement
HT-5
3mm-200mm (in steel)
30
For high temperature measurement (up to 300℃)
HT5-2
For high temperature measurement (up to 550℃)
ضخامت سنج التراسونیک برند اکستچ مدل TKG250
ضخامت سنج فلزات TKG250 مناسب برای اندازه گیری در دمای بالا و مناسب برای مواد سخت دارای رنج اندازه گیری گسترده همراه با پروب 5 مگاهرتز: از 0.040 اینچ تا 20 اینچ فولاد و پروب 10 مگاهرتز: از 0.040 اینچ تا 20 اینچ فولاد
صفحه نمایش ال سی دی رنگی با رنگ قرمز، زرد و سبز نشانه هشدار دیداری
دیتالاگر داخلی 100K به همراه انتقال داده ها به اکسل
دارای ویژگی Echo to Echo برای کاهش خطای پوشش دهی
دارای ویژگی مقایسه فایل ها
شکل موج زنده (A-اسکن برای تأیید ضخامت)
دارای ویژگی B-scan ( تصویر مقطعی از قطعه مورد آزمون )
آلارم ویبره
گزینه های مبدل چندگانه برای دمای بالا و برای اندازه گیری موادسخت
دارای ویژگی حداقل سریع برای گرفتن حداقل ضخامت
به همراه بطری 2 اونس c2 باتری AA ouplant، مبدل 5 مگاهرتز ، و جعبه حمل مستحکم ، کابل USB، و نرم افزار XPorter
The TKG250 is a Digital Ultrasonic Thickness Gauge/Datalogger with Color Waveform function. Extech offers Thickness Gauges designed in compact, handheld, rugged housing ideal for field use. The ultrasonic technology allows for non-destructive thickness measurements for primarily steel structures. Datalogs up to 100K readings and can be exported to Excel® for further analysis. Complete with protective holster, 2oz bottle of coolant, 2 AA batteries, 5MHz Transducer, hard carrying case, USB cable and Exporter software.
Wide measurement range:
5MHz probe: 0.040" to 20" of steel
10MHz probe: 0.030" to 2" of steel (optional)
Color LCD display with red, yellow and green visual alarm indication
100K internal datalogger with export to Excel
Echo to Echo option to reduce coating errors
File compare feature as a real time corrosion monitor
Live Waveform (A-scan for thickness verification)
B-scan (visual cross section of test piece)
Vibrates on alarm
Multiple transducer options for high temperature and difficult to measure materials
Complete with protective holster, 2oz bottle of couplant, 2 AA batteries, 5MHz Transducer, hard carrying case, USB cable and XPorter software
Fast minimum feature to capture minimum thicknesses
Specifications
Range
Steel Thickness Range
5MHz probe: 0.040 to 20" (1.0 to 508mm); 10MHz probe: 0.030" to 2" (0.76mm to 50.8mm)
Material velocity calibration range
0.200 to 0.7362 in/μS (0.508 to 18.699mm/μS)
Languages
English, French, Spanish, Italian, Czech, German, Portuguese, Slovak, Finnish, and Hungarian
Hold Mode
Holds display to retain last thickness reading with reverse video display
Freeze Mode
Freezes display (ideal for high temperature readings)
Fast Min/Max Mode
Displays Min or Max and actual thickness value at 20 measurements/sec
Units
Inches/Millimeters/Microseconds
Alarms
Audible beeping; illuminae flashing display and keypad; and vibration feedback
Illuminating Keypad
F1 = Red, F2 = Yellow, F3 = Green for easy, go/no-go testing
Gain - Variable adjustment
In 1dB steps from 20-90dB or Automatic Gain Control (AGC) for waveform
B-Scan - Displays a cross section of the test piece
Displays a visual cross section of inspection area with no correlation to distance. B-Scan alarm colors consist of: Red = below minimum/above maximum; Yellow = Caution; and Green = Good.
Echo to Echo
Measure the metal thickness only (paint & coatings do not affect base material thickness value)
Differential Mode
Displays the difference from the actual thickness measurement and a user entered reference value
Velocity Mode
Displays acoustic sound speed to measure thickness of unknown materials
Datalogger
Stores 50k readings (expandable to 100k) and 5,000 waveforms; file names up to 20 characters long; and the included Extech XPorter software extracts .csv data files that can be opened for viewing in MS Excel, Notepad, or Wordpad. File compare & grid review
Adjustment of manual range control or auto zoom tracking to center echoes independent of selected range
Rectification Modes
RF, Half Wave Positive, Half Wave Negative and Full Wave Rectification
Live Waveform (A-Scan)
Full adjustments for gain in 1dB step or AGC, main bang blank, blank after first received echo, range including zoom auto tracking to center echoes independent of material and rectification
Battery Life
8 to 14hrs (depends on operating conditions)
ضخامت سنج التراسونیک برند GE مدل DM5E
خانواده DM5E جدیدترین نسل ضخامت سنج های قابل حمل نظارت بر خوردگی از GE Sensing & Inspection Technologies هستند. بهبود قابل توجهی در عملکرد نسبت به ضخامت سنج های خوردگی قبلی از نظر پایداری بهتر اندازه گیری ضخامت و تکرارپذیری در دماهای معمولی و بالا ارائه می دهد. برای عملیات در سخت ترین شرایط طراحی شده است محیط های کاری، انجام اندازه گیری ضخامت دیوار در خطوط لوله، مخازن تحت فشار و مخازن ذخیره سازی در صنعت نفت و گاز و همچنین بخش های پتروشیمی و تولید برق.
اصول کارکرد:اولتراسونیک، روش اندازه گیری اکو پالس
رنج اندازه گیری:بسته به پروب و مواد، 0.60 میلیمتر تا 508 میلیمتر (0.025 اینچ تا 20.00 اینچ) در حالت اندازهگیری IP تا 1 BW، 2.00 میلیمتر تا 127.0 میلیمتر (0.079 اینچ تا 5.00 اینچ) در حالت Dual-Multi Measurement Rangeness، the 0.3 میلی متر تا 2.50 میلی متر (0 تا 0.098 اینچ) باشد.
رزولشن:0.01 میلی متر پیش فرض - قابل انتخاب 0.01، 0.1 میلی متر (0.001 اینچ پیش فرض - قابل انتخاب 0.001، 0.01 اینچ)
محدوده سرعت مواد:
0.508-18.699mm/msec
The DM5E family is the latest generation of portable corrosion monitoring thickness gauges form GE Sensing & Inspection Technologies. It offers significant improvement in performance over previous corrosion thickness gauges in terms of better thickness measurement stability and repeatability at normal and elevated temperatures. It has been designed for operation in the harshest of working environments, performing wall thickness measurements on pipelines,pressure vessels and storage tanks in the oil and gas industry, as well as the petrochemical and power generation sectors.
Operating Principle
Ultrasonic, Pulse Echo Measurement Method
Measuring Range
Depends on Probe and Material, 0.60 mm to 508 mm (0.025” to 20.00”) in IP to 1st BW Measurement Mode, 2.00 mm to 127.0 mm(0.079” to 5.00”) in Dual-Multi Measurement Mode, the Coating Thickness Range Shall be 0.3 mm to 2.50 mm (0” to 0.098”).
Measuring Resolution
0.01 mm Default - Selectable 0.01, 0.1 mm (0.001” Default - Selectable 0.001, 0.01”)
Material Velocity Range
0.508 to 18.699 mm/msec (0.0200 to 0.7362”/msec)
Material Velocity Resolution
1 m/s (0.0001”/msec)
Inch or Millimeter
Calibration
One-Point Cal, On-Block and Off-Block, Two-Point Cal
Pulser
Excitation Pulse
Spike Pulser
Voltage
120 V into 50 ohm Load, Using 20 MHz Oscilloscope
Receiver
Bandwidth
500KHz to 12 MHz @ -3 dB
Gain
Automatic Gain Control
Display Type
High-Resolution Graphical LCD, 64 x 128 Pixels, 53.0 mm x 27.0 mm with Backlight and Adjustable Contrast
Update Rate
4 Hz or 8 Hz, User Selectable, 24 Hz Scan Mode Capture Rate
Thickness Value Display
NORMAL View Mode
5 Digit, 10.6 mm (0.4”) High
B-SCAN View Mode
5 Digit, 2.55 mm (0.1”) High
Display of Last Reading
Solid Filled or Hollow Digits Indicate Coupled or Uncoupled Condition
Setups
9 Standard Setups for Probes
Alarm Settings
Minimum and Maximum Alarms, Range of 0.25 mm to 508 mm, 0. (0.010” to 20.00”) Reading Alternates Between Solid and Hollow When Alarms Are Enabled and Violated
Power Requirements
2 “AA” Size Batteries
Battery Life/Operating Time
Approximately 60 Hours
Instrument Shut-0ff
Selectable ALWAYS ON or AUTO OFF After 5, 10, 15, 30 Minutes of Inactivity
Language
Selectable English, German, French, Spanish, Italian, Russian, Japanese and Chinese
I/O Connectors
Transducer
Dual Lemo 00 (coax)
Mini-USB
Mini-USB to PC
Temperature
Operating
10°C to +50°C (+10°F to +120°F)-
Storage
20°C to +60°C (-10°F to +140°F)-
Weight
223 g (0.597 lb) Including Batteries
Size
138 mm x 32 mm x 75 mm
Shock
IEC 68-2-27 Ea, as per Mil Std 810C Method 516.2 Procedure I with a 15g 11ms Impulse Half Sinusoidal Wave Applied 6 Times per Axis
Sealing
IEC529 / IP54, Dust Proof/Dripping Water Proof as per IEC 529 Specifications for IP54 Classification
ضخامت سنج التراسونیک خوردگی برند الکومتر مدل ELCOMETER CG70BDL
ضخامت سنج خوردگی CG70 با نمایشگر بزرگ و خوانا، گزینه های A و B-Scan را برای تفسیر دقیق اندازه گیری ها در اختیار کاربران قرار می دهد.
حالت اندازه گیری: PEM، EE نرخ اندازه گیری: 4 خواندن در ثانیه 32 خواندن در ثانیه 6 خواندن در ثانیه محدوده اندازه گیری: PE: 0.63 الی 254 میلی متر EE: 2.54 الی 102 میلی متر دقت اندازه گیری: ± 1٪ یا ± 0.1 میلی متر وضوح اندازه گیری: 0.01 میلی متر محدوده کالیبراسیون سرعت: 1250 – 9999 متر بر ثانیه سرعت نمایش B-Scan: 15 ثانیه در هر صفحه نمایش محدوده فرکانس مبدل: 1 – 10 مگاهرتز صفحه نمایش: 1/8 اینچ VGA نوع باتری: 3 x AA قلیایی عمر باتری: 200 ساعت دمای کارکرد: 10- تا 60 درجه سانتیگراد اندازه (w x h x d): 63.5 x 165.0 x 31.5 میلی متر وزن (شامل باتری): 383 گرم
The CG70 range of corrosion thickness gauges with its large, easy to read display, provides users with A and B-Scan options for accurate interpretation of measurements.
The Elcometer CG70 corrosion thickness gauge is available in two models: CG70BDL and CG70ABDL. Both models offer 2D cross sectional block view, providing a graphical representation of a materials thickness, ideal for accurate analysis and identification of pits and corroded areas.
Features:
Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
Multiple calibration and material selection options
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
64 User definable setups
High speed scan: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 12,000 readings and waveforms or B-Scans
Download to ElcoMaster® data management software
Measurement Mode: PEm, EE
Measurement Rate:
+ 4 readings per second
+ 32 readings per second
+ 6 readings per second
+ PE: 0.63 - 254mm
+ EE: 2.54 - 102mm
Measurement Accuracy: ± 1% or ±0.1mm
Measurement Resolution: 0.01 mm
Velocity Calibration Range: 1250 - 9,999m/s
B-Scan display speed: 15 seconds per screen
Transducer Frequency Range: 1 - 10MHz
Display: 1/8 inch VGA
Battery Type: 3 x AA alkaline
Battery Life: 200 hours
Operating Temperature: -10 to 60ºC
Size (w x h x d): 63.5 x 165.0 x 31.5mm
Weight (including batteries): 383g
RS232 Interface: Bi-directional
Packing List: Elcometer NDT CG70BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable
Model & Part Number
CG70BDL
CG70ABDL
Material thickness digits display
■
B-Scan cross sectional display
Combined B-Scan and digits display
Scan bar display
A-Scan display
+ Rectified, - Rectified, Full Waveform (RF)
Measurement Mode
PE & EE (ThruPaint™)
Measurement Rate Manual: Scan mode Scan bar display
4 readings per second 32 readings per second 6 readings per second
Measuring Range1
PE: 0.63 - 254mm (0.025 - 9.999 inches) EE: 1.27 - 102mm (0.05 - 4.00 inches)
PE: 0.63 - 254mm (0.025 - 9.999 inches) EE: 2.54 - 102mm (0.100 - 4.00 inches)
Measurement Accuracy1
± 1% or ±0.1mm whichever is the greater
Measurement Resolution
0.01mm (0.001 inches)
Velocity Calibration Range
1250 - 9,999m/s (0.0492 - 0.3937in/μs)
1250 - 10,000m/s (0.0492 - 0.3936in/µs)
High speed scan mode
Differential mode
Limit alarm mode
B-Scan display speed
15 seconds per screen
Flaw mode
Basic prove-up flaw detection using single element angle beam transducers
Calibration setups
6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates
• PE: 1 gate; EE: 2 gates, 1 gate with hold off • Adjustable threshold
Pulser type
Square wave pulser
Square wave pulser with adjustable pulse width (spike, thin, wide)
PE: selectable low, medium or high gain EE: automatic gain control (AGC)
Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)
Timing
20MHz with ultra low power 8 bit digitizer
Data logging
• 12,000 readings with waveform • Sequential and grid logging • Alpha numeric batch identifaction • OBSTRUCT indicates inaccessible locations
Calibration Options
Single, two point, velocity & material type
Transducer Probe Type
Dual element
Transducer Frequency Range
1 - 10MHz
Transducer recognition
Manual - selectable from a list
V-path / dual path error correction
Automatic
Probe zero
Manual (via integrated probe disk)
Display
1/8" VGA (greyscale) 62 x 45.7mm (2.4 x 1.8 inch) viewable area
Units (selectable)
mm or inches
LED Backlight
on / off / auto
Repeatability / Stability Indicator
Battery Type
3 x AA alkaline
Battery Life (approximate)
200 hours
Low Battery Indicator
Battery Save Mode
Auto
Operating Temperature
10- , 60 ºC (14 to 140ºF)
Size (w x h x d)
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
Weight (including batteries)
383g (13.5oz)
Aluminium case design with gasket sealed end caps,
waterproof membrane keypad
Transducer Connector Type
LEMO
RS232 Interface
Bi-directional
<p style="margin-bottom:0in;margin-bottom:.0001pt;line-h
ضخامت سنج التراسونیک خوردگی برند الکومتر مدل ELCOMETER CG70ABDL
کاتالوگ محصول
ELCOMETER-CG70-PDF
ضخامت سنج التراسونیک خوردگی برند الکومتر مدل ELCOMETER CG100B
حالت اندازه گیری: PE، PETP، EE، EEV، CT، PECT نرخ اندازه گیری: 4 خواندن در ثانیه 50 خواندن در ثانیه 6 خواندن در ثانیه محدوده اندازه گیری PE: 0.63 - 508mm PETP: 0.63 - 508mm EEV: 1.27 - 25.4mm PECT: 0.63 - 508mm PECT: 0.01 - 2.54mm گزینه های کالیبراسیون: تک، دو نقطه، سرعت و نوع مواد دقت اندازه گیری: ± 1٪ یا ± 0.1 میلی متر وضوح اندازه گیری: 0.01 میلی متر محدوده کالیبراسیون سرعت: 1250 - 9999 متر بر ثانیه سرعت نمایش B-Scan: 15 ثانیه در هر صفحه نمایش محدوده فرکانس مبدل: 1 - 10 مگاهرتز صفحه نمایش: 1/8 اینچ VGA، نرخ به روز رسانی صفحه نمایش 25 هرتز نوع باتری: 3 x AA قلیایی عمر باتری: 150 ساعت دمای کارکرد: -10 تا 60 درجه سانتیگراد اندازه (w x h x d): 63.5 x 165.0 x 31.5 mm وزن (شامل باتری): 383 گرم
CG100 Corrosion Thickness Gauges
With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.
The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.
Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
Time corrected gain (TCG)
Gate control
Threshold adjustment
64 User defined setups
Multiple language display
High speed scan mode: 32 readings per second
Data output and storage: 16,000 readings and waveforms or B-Scans
Measurement Mode: PE, PETP, EE, EEV, CT, PECT Measurement Rate: + 4 readings per second + 50 readings per second + 6 readings per second Measuring Range + PE: 0.63 - 508mm + PETP: 0.63 - 508mm + EEV: 1.27 - 25.4mm + PECT: 0.63 - 508mm + PECT: 0.01 - 2.54mm Calibration Options: Single, two point, velocity & material type Measurement Accuracy: ± 1% or ±0.1mm Measurement Resolution: 0.01 mm Velocity Calibration Range: 1250 - 9,999m/s B-Scan display speed: 15 seconds per screen Transducer Frequency Range: 1 - 10MHz Display: 1/8 inch VGA, Display Refresh Rate 25Hz Battery Type: 3 x AA alkaline Battery Life: 150 hours Operating Temperature: -10 to 60ºC Size (w x h x d): 63.5 x 165.0 x 31.5mm Weight (including batteries): 383g RS232 Interface: Bi-directional
ضخامت سنج التراسونیک برند MITECH مدل MT600
ضخامت سنج اولتراسونیک چند حالته MT600 یک محصول ارتقا یافته است. ما به تجربه کاربر و ویژگیهای نوآورانهای مانند تجربه بصری، درجه حفاظت، زنگ خودکار و غیره توجه بیشتری میکنیم. صفحه نمایش رنگی TFT (320 × 240 TFT LCD) با نور پسزمینه قابل تنظیم، به کاربر اجازه میدهد در محل کار با دید کم کار کند.ضخامت سنج التراسونیک MT600درجه حفاظت IP65، می تواند به طور موثر از محیط های خشن نفت، گرد و غبار و سایر خوردگی ها جلوگیری کند.
دارای عملکرد پخش صدا، زنگ خودکار
وضوح 0.1 میلی متر / 0.01 میلی متر / 0.001 میلی متر
ارتباط بلوتوث و نفوذ در حالت پوشش و عملکردهای حالت عادی و...
می تواند ضخامت بستر را بدون نیاز به دور انداختن مستقیم پوشش اندازه گیری کند
رنج اندازه گیری: 0.65-600mm(P-E) 3-100mm(E-E)
ذخیره سازی ارتباط: USB، بلوتوث
زمان کار: 30 ساعت (تنظیم روشنایی پیش فرض)
ابعاد: 150mm×76mm×38mm
MT600 multi-mode ultrasonic thickness gauge is a upgraded product. We pay more attention to user experience and innovative features such as visual experience, protection grade, automatic alarm and etc..Color TFT display (320×240 TFT LCD) with adjustable backlight, allow the user to work at worksites with low visibility. IP65 degree of protection, can effectively prevent harsh field environments of oil, dust and other corrosion.
It also has voice broadcast function, automatic alarm., 0.1mm/0.01mm/0.001mm resolution, bluetooth communication and penetrate the coating mode and normal mode functions and etc.. It can measure the substrate thickness without the need to dispose of coating directly. Its unique non-destructive testing performance provide the perfect solution for the thickness testing of closed Pipes, containers, etc.
It is widely used in petroleum, chemical, metallurgy, shipbuilding, aviation, aerospace and other fields because of monitoring corrosion thinning degree of various pipes and pressure vessels.It can also be used for precise measurement of sheet metal and machined parts. This professional precision instrument is to improve production efficiency and qualified rate, cost saving.
Measuring range:0.65-600mm(P-E),3-100mm(E-E)
Resolution Accuracy:0.1/0.01/0.001mm
Communication storage:USB,Bluetooth
Working time:30h (default brightness setting)
Main unit weight:295g
Total weight:1.5KG
Dimensions:150mm×76mm×38mm
ضخامت سنج التراسونیک برند تمتک مدل TM220
محدوده اندازه گیری: IE یا حالت استاندارد اکو رابط: 0.15 الی 20 میلی متر حالت EE یا اکودراکوی با دقت بالا: 0.15 الی 10 میلی متر وضوح صفحه نمایش: قابل انتخاب 0.001 / 0.01 / 0.1 میلی متر محدوده سرعت صدا:
1000-9999m/s
0.039-0.394in/μs
دقت (0.001 میلی متر): ضخامت (e)> 3 میلی متر: ±0.005 میلی متر ضخامت (e) <20 میلی متر: ±0.05 میلی متر نرخ تجدید اندازه گیری: 4 مگاهرتز در حالت عادی تا 25 هرتز در حالت اسکن MIN ظرفیت حافظه: حداکثر 500 اندازه گیری به حداکثر 5 گروه تقسیم می شود کالیبراسیون: سریع 1 نقطه روی بلوک مرجع روی واحد (فولاد) یا روی بلوک دقیق یا کالیبراسیون 2 نقطه با دقت بالا در 2 بلوک کالیبراسیون زنگ صوتی حداکثر در دقیقه صفحه نمایش: 128×64 پیکسل ماتریس LCD، 42×57 میلی متر، با نور پس زمینه و کنتراست قابل تنظیم، اندازه کاراکتر تا 13.75 میلی متر دمای کار: -10 تا 50 درجه سانتیگراد ابعاد: 149x73x32 میلی متر وزن: 200 گرم منبع تغذیه: 2 عدد باتری قلمی 1.5 درجه سانتی گراد، زمان کارکرد بدون نور پس زمینه ± 200 ساعت، نشانگر کم بودن باتری خاموش شدن خودکار پس از 4 دقیقه عدم استفاده دارای رابط RS 232C
Ultrasonic thickness gauge TM220, 15 MHz, 0.001 mm
This new pocket-sized ultrasonic thickness gauge offers high performance in a small, lightweight, ergonomic package. Its biggest advantage is its measuring range for thin thicknesses of 0.15 to 20mm (steel plates). The keypad operator interface is easy to use and has a mode selection key, a calibration key, three function arrow keys to activate and set the functions and navigate the menu plus a memorize key and the transfer of measurements. A steel probe calibration gauge is integrated into the front panel and the display resolution can be switched from 0.001 to 0.1mm. If you need to document your measurement results, they can be printed out or transferred to a PC.
particularly suitable for testing thin parts
test mode: I-E or E-E
I-E: for the measurement of thick walls, but the results are influenced by the quality of the coupling
E-E: for measuring walls up to a certain thickness limit, the measurement results will be more stable and precise
single point sound speed test and calibration
indication of the quality of the coupling
max / min audible alarm
mm / inch selection
display backlight
automatic shutdown after 4 minutes
storage of measurements, display and deletion
measuring range: IE or standard interface-echo mode: 0.15 ~ 20mm EE or high precision echo-echo mode: 0.15 ~ 10mm
display resolution: selectable 0.001 / 0.01 / 0.1 mm
sound speed range: 1000~9999 m/s or 0.039~0.394 in/µs
accuracy (0.001 mm): * thickness (e)> 3 mm: ± 0.005 mm * thickness (e) <20 mm: ± 0.05 mm
measurement refresh rate: * 4 MHz in normal mode * up to 25 Hz in MIN scan mode
memory capacity: up to 500 measurements to be divided into a maximum of 5 groups
calibration: rapid 1 point on the reference block on the unit (steel) or on a precision block or high precision 2 points calibration on 2 calibration blocks
audible alarm max/min
display: 128x64 pixel matrix LCD, 42x57 mm, with backlighting and adjustable contrast, character size up to 13.75 mm
operating temperature: -10~+50° C
dimensions: 149x73x32 mm
weight: 200 gr
power supply: 2 x 1.5C AA batteries, operating time without backlight ± 200 hours, low battery indication
Auto power off after 4 minutes of non-use
RS 232C serial interface
ضخامت سنج التراسونیک برندTMTECK مدلTM281DL
نوع نمایش: OLED رنگی 2.4 اینچی، 320×240 پیکسل، کنتراست 10000:1 اصول کارکرد :اکو پالس با مبدل های دو عنصری محدوده اندازه گیری: 0.50 میلی متر تا 508 میلی متر (0.02 اینچ تا 20.00 اینچ)، بسته به جنس، پروب و وضعیت سطح وضوح اندازه گیری: قابل انتخاب 0.01 میلی متر، 0.1 میلی متر (قابل انتخاب 0.001 اینچ، 0.01 اینچ) واحدها: اینچ یا میلی متر حالت اصلاح: RF+، RF-، HALF+، HALF-، FULL حالت نمایش: معمولی، حداقل/حداکثر عکسبرداری، DIFF/RR، A-Scan، B-Scan تصحیح مسیر V:خودکار نرخ بروز رسانی: 4 هرتز، 8 هرتز، 16 هرتز قابل انتخاب
Display Type:
2.4'' Color OLED, 320×240 Pixels, Contrast 10,000:1
Operating Principle:
Pulse Echo With Dual Elemet Transducers
Measuring Range:
0.50mm To 508mm(0.02'' To 20.00''), Depending On Material, Probe And Surface Condition
Measuring Resolution:
Selectable 0.01mm, 0.1mm(selectable 0.001'', 0.01'')
Units:
Inch Or Millimeter
Rectify Mode:
RF+, RF-, HALF+, HALF-, FULL
Display Mode:
Normal, Minimum/Maximum Capture, DIFF/RR%, A-Scan, B-Scan
V-Path Correction:
Update Rate:
Selectable 4Hz, 8Hz, 16Hz
Material Velocity Range:
500 To 9999m/s(0.0197 To 0.3939 In/μs)
ضخامت سنج التراسونیک مدل CYGNUS 1
حالت اندازه گیری:Multiple-Echo using 3 echoes to ignore coatings
متریال:Velocities from 2000 – 7000 m/s (0.059 – 0.31 in/us) – covers virtually all common engineering materials
دقت:±0.1میلی متر
رزولشن:0.1 میلی متر
محدوده اندازه گیری روی فولاد:1 – 250 میلی متر
Key Features of the Cygnus 1 Intrinsically Safe
Certified Intrinsically Safe to:
ATEX II 1 G Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) I M 1 Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. BAS00ATEX1108
UKEX II 1 G Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) I M 1 Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. BAS21UKEX0661
IECEx Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. IECEx BAS 19.0021
CSA Class 1 Group A, B, C, D Division 1
For use in Zone 0, Zone 1 hazardous areas
No plant shutdown or hot work permit necessary
Approved for use in mines
Echo strength indicator to aid measurement
Stable calibration, linear accuracy, no zero adjustment
Self-verification of the measurements to ensure maximum accuracy
Two rechargeable battery packs with charger
Displays sound velocity settings
Right angle probe for use in areas of restricted access
Probe frequency selectable
Metric / imperial switchable
Low battery warning.
Cygnus-Pioneered Multiple Echo Technique
Measures remaining metal thickness on corroded and coated structures
All measurements are error checked using 3 return echoes to give repeatable, reliable results
Accepted by all major classification societies
Greatly reduces inspection time and costs
Echo strength indicator to aid measurement.
Measuring Mode
Multiple-Echo using 3 echoes to ignore coatings
Materials
Velocities from 2000 – 7000 m/s (0.059 – 0.31 in/us) – covers virtually all common engineering materials
Accuracy
±0.1 mm (±0.004 inch) or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure
Resolution
0.1 mm (0.004 inch) or 0.05 mm (0.002 inch) (selectable)
Probe Options
Single crystal probes
Measurement Range in Steel
1 – 250 mm (0.040 – 10 inch) depending on selected probe and configuration, material and temperature
Power
NiMH rechargeable battery pack
12 hours’ continuous operation
Bright LED display
235.75
910 g (32 oz) with remote probe (inc. batteries)
Operating Temp.
10°C to +50°C ( 14°F to 122°F)-
Certification
ATEX II 1 G Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) I M 1 Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. BAS00ATEX1108UKEX II 1 G Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) I M 1 Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. BAS21UKEX0661IECEx Ex ia IIC T6 Ga (Tamb = -20°C to 40°C) Ex ia I Ma (Tamb = 0°C to 45°C) Certificate No. IECEx BAS 19.0021CSA Class 1 Group A, B, C, D Division 1
Environmental Protection
IP65
Standards
Designed for EN 15317
ضخامت سنج التراسونیک مدل +CYGNUS 2
حالت اندازه گیری:Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick Single-Echo using 1 echo
متریال:Velocities from 1,000 – 9,000 m/s
دقت:±0.05میلی متر
رزولشن:Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch) Single-Echo and Echo-Echo modes – 0.01 mm (0.005 inch) or 0.01 mm (0.001 inch)
رنج اندازه گیری روی فولاد:0.8 – 250 میلی متر
Key Features of the Cygnus 2+ Hands-Free UTG
Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
Echo-Echo and Single-Echo modes for heavily corroded metals with a thin or no coating
Hands free operation: wrist, waist belt and harness mountable
Deep Coat function ignores coatings up to 20 mm (0.8 inch) thick
MSI™ (Measurement Stability Indicator) verifies stable, reliable readings
Intuitive easy to use menu
Extremely rugged enclosure – shock and impact proof to US MIL STD 810G
Environmental sealing (water and dust proof) to IP67 – US MIL STD 810G.
Uses single and twin crystal probes
One and two point calibration.
Three Versatile Measuring Modes
Multiple-Echo mode uses three error checked back wall echoes to provide the most reliable and accurate remaining thickness measurements, with no need to remove coatings (up to 20 mm thick (0.8 inch))
Single-Echo mode is ideal for measuring uncoated metals with heavy front and/or back-wall corrosion. Also effective on a range of cast metals, plastics and composites
Echo-Echo mode works best for measuring heavily corroded metals through thin coatings of up to 1 mm (0.04 inch) thick, ideal for measuring painted metals with heavy back wall corrosion.
Measuring Modes
Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick Single-Echo using 1 echo
Velocities from 1,000 – 9,000 m/s (0.0390 – 0.3543 in/us)
±0.05 mm (±0.002”) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on ±0.1 mm (±0.004”) or 0.1% of thickness measurement whichever is the greatest – in Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the same material as calibrated on
Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch) Single-Echo and Echo-Echo modes – 0.01 mm (0.005 inch) or 0.01 mm (0.001 inch)
Single crystal probes and Twin crystal probes
0.8 – 250 mm (0.031 – 10 inch) depending on selected probe and configuration, material and temperature
Connector
2 x Lemo 00
3 x AA / R6 batteries
10 hours continuous measurement
Electronics
Dual channel pulser
End-mounted rotatable LCD, 25.58 x 6.38 mm
84.130.35
300 g (10.5 oz) (inc. batteries)
10°C to 50°C (14°F to 122°F)-
Environmental Rating
IP67 MIL STD 810G Method 501.6 (high temp +55°C (131°F)) MIL STD 810G Method 502.6 (low temp -20°C (-4°F)) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion 1 metre for 30 mins)
Shock and Impact
MIL STD 810G Method 514.7 (vibration) MIL STD 810G Method 516.7 (shock 20g) MIL STD 810G Method 516.7 (transit drop 1.22 m)
Compliance
CE, UKCA, RoHS
ضخامت سنج التراسونیک مدل CYGNUS 4
متریال:
Velocities from 1,000 – 9,000 m/s
رنج اندازه گیری روی فولاد:1 - 250 میلی متر
Key Features of the Cygnus 4 General Purpose UTG
Min/Max measurement limit functions
Visual and vibrate alert
Simple, one-point calibration – no zeroing required
Large and bright front colour LCD display
±0.05 mm (or ±0.002 inch) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on
0.1 - 0.05
Lemo 1S
AA / R6 batteries
2.4 inch QVGA LCD, 47 X 37 mm
38.130.35
300 g
10°C to 50°C (14°F – 122°F)-
ضخامت سنج التراسونیک مدل +CYGNUS 4
متریالکVelocities from 1,000 – 9,000 m/s
Key Features of the Cygnus 4+ General Purpose UTG
Measurements can be taken on hot surfaces, up to 300°C (572°F), using the NEW Cygnus High Temperature Probe (T5B-MAUH)
Manual and automatic gain control
Min/max measurement limit functions with visual and vibrate alert
Large front sunlight readable LCD display with Live A-scan
Water and dust tight IP67 housing
Shock and impact proof to US MIL STD 810G
Safe operation in explosive atmospheres: Class 1, Division 2, Group D locations only, as defined in NFPA 70, Article 500
High Temperature Measurement
Using the NEW T5B-MAUH high temperature probe, measurements can be taken on hot surfaces of up to 300°C (572°F).
No cooling period required – reducing inspection time and facilitating more effective measurement
Option to use standard cable or more robust, braided cable.
Basic Data Logging
Linear based data logging
Eight user-defined comments to attach to any measurement point
Auto-log feature
Saves measurements and A-scans
Records stored on SD card
CygLink software used to transfer and manage data.
±0.05 mm (±0.002 inch) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on ±0.1 mm (±0.004 inch) or 0.1% of thickness measurement whichever is the greatest – in Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the same material as calibrated on
Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch) Single-Echo and Echo-Echo modes – 0.1 mm (0.005 inch) or 0.01 mm (0.001 inch)
Single crystal probes, Twin crystal probes and High temperature probe
Lemo 00
2.4 inch QVGA LCD, 47 x 37 mm
Data Logging
5,000 measurements and A-scans per record. Max number records: 100 (soft limit)
Computer Software
CygLink allows remote logging and viewing of A-scan graphs Survey and report generation to PDF file Graphic analysis of data and statistical calculations
IP67 Safe operation in Explosive Atmospheres: Class I, Division 2, Group D Locations only, as defined in the National Fire Protection Association Code (NFPA 70), Article 500. Tested using MIL-STD-810G, Method 511.5, Procedure I MIL STD 810G Method 501.6 (high temp +55°C (131°F)) MIL STD 810G Method 502.6 (low temp -20°C (-4°F)) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion 1 metre for 30 mins)
ضخامت سنج التراسونیک مدل +CYGNUS 6
حالت اندازه گیری:
Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick. Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick. Single-Echo using 1 echo
محدوده اندازه گیری روی فولاد:
0.8 – 250 میلی متر
Key Features of the Cygnus 6+ PRO UTG
Temperature Compensation feature for measurement on hot materials
Freeze function
One and two point calibration
Bluetooth™ for data transfer
Large front LCD display and an end-mounted LCD display with grayscale setting for bright sunlight
Shock and impact proof to US MIL STD 810G.
Comprehensive Data Logging
Probe options
2.4 inch QVGA LCD and end-mounted rotatable LCD 25.58 x 6.38 mm
300 g (10.5 oz) (inc. Batteries)
5,000 measurements and A-scans per record Max number records: 100 (soft limit)
ضخامت سنج التراسونیک برندTMTECK مدلTM281D
نوع نمایش: OLED رنگی 2.4 اینچی، 320×240 پیکسل، کنتراست 10000:1
اصول کارکرد :اکو پالس با مبدل های دو عنصری
محدوده اندازه گیری: 0.50 میلی متر تا 508 میلی متر (0.02 اینچ تا 20.00 اینچ)، بسته به جنس، پروب و وضعیت سطح
وضوح اندازه گیری: قابل انتخاب 0.01 میلی متر، 0.1 میلی متر (قابل انتخاب 0.001 اینچ، 0.01 اینچ)
واحدها: اینچ یا میلی متر
TM281
TM281D
Color Display
√
Live A-Scan
Time-based B-Scan
Control of Gain and Gate
Blanking
Thru-paint&coatings
×
Data Logger
DataView Software
2.4'' color OLED, 320×240 pixels, contrast 10,000:1
Pulse echo with dual elemet transducers
0.50mm to 508mm(0.02'' to 20.00''), depending on material, probe and surface condition
Rectify Mode
Display Mode
Normal, Minimum/Maximum capture, DIFF/RR%, A-Scan, B-Scan
V-Path Correction
500 to 9999m/s(0.0197 to 0.3939 in/μs)
English, French, German, Japanese,Chinese
Minimum and Maximum alarms. Range of 0.25mm to 508mm (0.010'' to 20.00''). Dynamic waveform color change on alarm
2 AA size batteries
Operating Time
Approximately 40 hours
Instrument Shut-off
Selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
10-,50
156. 75.38
270g including batteries
ضخامت سنج التراسونیک برند الکومتر مدل ELCOMETER 204
ضخامت سنج اولتراسونیک فولادی Elcometer 204 که برای سهولت استفاده از قبل کالیبره شده است، اندازه گیری سریع و دقیق ضخامت فولاد را فراهم می کند.
محدوده اندازه گیری:0.63 تا 500 میلی متر
دقت:1± میلی متر
دارای واحد های میلی متر و اینچ
آسان برای استفاده از ساختار منو در چندین زبان
منبع تغذیه USB از طریق کامپیوتر
صفحه نمایش رنگ روشن؛ با تنظیم خودکار یا دستی روشنایی
Pre-calibrated for ease of use, the new Elcometer 204 steel ultrasonic thickness gauge provides fast, accurate measurement of the thickness of steel.
Displays key statistics
In addition to the material thickness measurement, the new Elcometer 204 displays key statistical values required to assess the overall material thickness; number of readings (n), the average material thickness (x), the lowest (Lo) and highest (Hi) material thickness, the standard deviation (σ) and the coefficient of variation (CV%).
Zero Point calibration for accuracy
The new, easy to use, Elcometer 204 has zero point calibration, ensuring accurate thickness measurements on steel surfaces.
Live data output to PC
As each measurement is taken, the new Elcometer 204 transmits the thickness values via USB straight into an inspection application or into ElcoMaster®, for instant report generation.
Key features of the Elcometer 204 Steel Ultrasonic Material Thickness Gauge include:
Pre-calibrated for measuring on steel only
Measures steel thickness from 0.63mm up to 500mm (0.025 - 20”)
Pre-set measurement rate of 4Hz (4 readings per second) provides faster readings
Supplied with everything required for use
Measures the material thickness when there is access to only one side
Integrated zero disc, ensures maximum accuracy
Transfer live readings via USB to ElcoMaster®
Intelligent transducer attached with auto-recognition ensures correct probe is identified when the transducer is changed. The Elcometer 204 is supplied with a 5MHz ¼” Potted Right Angle Dual Element Thickness Transducer.